Shooter63
|
| posted on 24/1/21 at 11:29 AM |
|
|
What's it worth
I'm thinking of breaking my stylus and wondered what I can reasonably expect to get for the rolling chassis/body, it's fully registered in
my name non Q plate and goes through a MOT on visual smoke for emissions. The body is ok with a couple of bits of starring , the left hand cill has
been cut open for a side mount exhaust, floor mount pedal box, pro comp dampers and springs etc
Cheers
Shooter
Forgot to say it's got a full good fitting soft top as well
[Edited on 24/1/21 by Shooter63]
|
|
|
|
|
rdodger
|
| posted on 24/1/21 at 01:00 PM |
|
|
Any pictures, description of what parts would be included?
|
|
|
Shooter63
|
| posted on 24/1/21 at 03:54 PM |
|
|
Let's say, just the rolling chassis, so no engine, no gearbox, no diff ( but diff housing) , all suspension in place, all wheels ( 14"
minilite type ) 888 tyres, side silencer 2.5" bore, all brake lines and hand brake , obviously all wiring as the car has been on the road years
and a full dash of instruments. So in other words, stick an engine /box/ diff in it and off you go
Shooter
|
|
|
jimmyd
|
| posted on 25/1/21 at 10:47 AM |
|
|
Here’s the thing, likes of me is looking for new project and would be keen on this but can do nothing about viewing/collecting etc whilst I’m locked
down with no nonessential travel etc. You may be best holding for a while or be prepared to have likes of me say I can’t view it and will need a 3rd
party to collect and deliver so that needs reflected in the price.
|
|
|
rdodger
|
| posted on 25/1/21 at 10:50 AM |
|
|
Any chance of pictures?
|
|
|
Shooter63
|
| posted on 25/1/21 at 10:27 PM |
|
|
quote:
Originally posted by rdodger
Any chance of pictures?
I think I just uploaded it to my photo archive
Shooter
|
|
|
BAS
|
| posted on 30/1/21 at 01:33 PM |
|
|
With V5c, but no engine, it's got to be worth £3K+.
A chassis with Reg only (correct reg that is) seem to go for £1.5K as this would be the rough cost of an IVA.
|
|
|
big_wasa
|
| posted on 30/1/21 at 03:00 PM |
|
|
In the simler position where I want to keep my engine for my next project.
I would want £4K for a solid properly registered roller with a few nice bits. But I am collecting parts for a simpler install as the price of these
little cars is on the up. Ready for summer with an mot £6.5k+
|
|
|
Shooter63
|
| posted on 30/1/21 at 05:32 PM |
|
|
It's registered in my name v5c states 2005 sylva stylus V reg
|
|
|
