LocostBuilders - powered by XMB

Can anyone id my sierra hazard switch cover

bodger - 12/1/10 at 02:34 PM

Can anyone id my sierra hazard switch cover from these photos? I think it was a round one but unsure of size. I need a replacement if anyone has one.

cd.thomson - 12/1/10 at 02:36 PM

Haz1

Description

Description

Description

Description

bodger - 12/1/10 at 02:39 PM

Thanks Craig, I was just scratching my head wondering why the images hadn't come up.

blakep82 - 12/1/10 at 02:41 PM

quote:
Originally posted by bodger
Thanks Craig, I was just scratching my head wondering why the images hadn't come up.

you used the URL for the page the picture was shown on, rather than the URL for the photo itself

Mr G - 12/1/10 at 04:43 PM

Looks like the early mk1 square type to me with a later mk2 (round hazard) top cowling. Some mk1 models had the horn push at the end of the indicator stalk.

Mk1 Indicator stalks have a pin 15, if its mk2 they have a pin 31 (where the plug goes on is numbered)

Thing is they done 2 different types of 'square' hazard cover as well to make it more difficult trying to get the correct one.

EDIT: Previous post on the matter

[Edited on 12/1/10 by Mr G]

bodger - 12/1/10 at 09:10 PM

That makes some sense. Their is a Pin 15 so they are Mk1 stalks. The cowling I got separately so it could well be a Mk 2.
If I can't get something to fit I'll have to get a separate hazard switch which is a shame - & more expense.
Anyway thanks for your help.

twinturbo - 12/1/10 at 10:15 PM

The switch is still square on a MK2 with a round top.

TT