Board logo

Searching Lower wishbone for MK locost
alfas - 30/10/17 at 10:48 AM

as spare (the actual ones are still ok...but who knows what all can happen on the track), iīm searching front wishbones for my MK Locost (very early chassis)

iīm using the below pic only as refernce to explain the dimensions:


on upper wishbone the 365mm measuremtn is 230mm..is at least this measuremtns something common?

kitcardirect - 30/10/17 at 02:14 PM

Hi

this any good for you?

http://www.kitcardirect.co.uk/locost-bottom-front-wishbone.html

alfas - 30/10/17 at 09:16 PM

measurements look totally different, imo.

kitcardirect - 31/10/17 at 09:48 AM

ok sorry this must be as per the standard MK front wishbone, i thought you wanted locost, our error,

http://www.kitcardirect.co.uk/mk-indy-bottom-front-wishbone.html

The 365 mm is including the poly bushed inserted is that correct?

Total length we have from tip to tip is 395mm, and from hole centre to hole centre 337mm,

hope this helps

alfas - 1/11/17 at 12:49 PM

its an MK locost...not indy

the measurements given are without bushes. 365 on lower, 320 on upper

kitcardirect - 1/11/17 at 12:59 PM

ok sorry we couldn't help you

40inches - 1/11/17 at 01:04 PM

quote:
Originally posted by alfas
its an MK locost...not indy

the measurements given are without bushes. 365 on lower, 320 on upper


My MK Locost chassis is a very early one, built around 1999. The new oval tubed MK Indy front wishbones fitted fine
The only difference between the Indy and Locost versions is at the rear. From my experience.

alfas - 1/11/17 at 07:22 PM

can you take the measurements of your carīs wishbones, please and compare?

imo, MK Indyīs have a much wider front-track than MK Locostīs