pekwah1
|
| posted on 20/5/20 at 08:37 PM |
|
|
Where to get exhaust tip
Hi guys,
Have been searching for ages for a 2” 90 degree bend and outwardly rolled but can’t find one.
Anyone got any ideas?
Thanks
Andy
|
|
|
|
|
big_wasa
|
| posted on 20/5/20 at 09:19 PM |
|
|
I couldn’t find one sensibly priced either and stainless is hard to form so I welded one on with a straight slash cut.
|
|
|
ianhurley20
|
| posted on 21/5/20 at 08:27 AM |
|
|
I made my first one but later came across custom chrome from Nuneaton at the national kitcar show. They will make anything. They made me a 2"
stainless tailpipe with a 90deg bend and rolled edge to my exact measurements and were not expensive (£14 inc post??). You can find them on facebook
or https://www.cherrybomb.co.uk/ and I think other sites as well
My build blog http://ianhaynes20.wordpress.com IVA passed 3/10/16
written off 23/9/18
Aug 2019 completed Tiger Avon with ST170 on TB's
Now restoring 1968 Ginetta G4
And - a series 1 Land Rover - don't ask why!
|
|
|
pekwah1
|
| posted on 21/5/20 at 09:23 AM |
|
|
Thanks both, will definitely try the custom chrome guys!
|
|
|
Leeroy06
|
| posted on 21/5/20 at 07:11 PM |
|
|
I had the same problem. I had a 80 degree bend kicking around and ordered a 6mm thick mooring ring on ebay. Welded it on the tip of the pipe then
fettled it back with a belt sander. Has come out spot on. The mooring ring was less than £2.
Lphillips
|
|
|
