Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: zetec ally expansion tank rad cap??
simon04

posted on 31/1/21 at 10:13 PM Reply With Quote
zetec ally expansion tank rad cap??

Hi all
this weeks question is what pressure rad cap will i need for my expansion tank
im using a brand new 2/0 zetec black top
the expasnsion tank is made from ally and has the normal push down 1/4 turn metal radcap


Thanks
Simon

View User's Profile View All Posts By User U2U Member
big_wasa

posted on 1/2/21 at 06:23 AM Reply With Quote
Mine is a Stant 10334 18psi.
View User's Profile View All Posts By User U2U Member
cliftyhanger

posted on 1/2/21 at 08:55 AM Reply With Quote
Not too critical, anything 13-20psi ish will work.
a 13psi cap increases the boiling pt of water by about 20 degrees. Bear in mind 50:50 antifreeze does something similar, you really should not be troubled by the coolant boiling up unless there is a real problem elsewhere.

View User's Profile View All Posts By User U2U Member
indykid

posted on 2/2/21 at 09:48 AM Reply With Quote
Check the diameter of the cap.

The original neck on my alloy expansion tank used a larger cap than the neck I replaced it with. I think there are only 2 standard sizes, but don't get the wrong one.






View User's Profile Visit User's Homepage View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.