Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Chester Sportscars Carb Kit

posted on 7/3/17 at 08:36 PM Reply With Quote
Chester Sportscars Carb Kit

Has anyone fitted the Chester Sportscars bike carb complete kit with Ignition etc. Wondering if its plug and play and how much the kit is these days.



View User's Profile View All Posts By User U2U Member

posted on 7/3/17 at 09:38 PM Reply With Quote
Had one of the earlier ones with megajolt (now use nodiz) on a stock 2.0l silvertop. Easiest thing ever, bolt on the manifold/carbs which were pre jetted and ecu preprogrammed. Just hook up the five or six wires and off you go, set the idle and run all day. The next owner had it rolling roadbed at 165hp, can't be bad. Iirc it was about 1k all in.

You will need either a bike fuel pump or I used a facet posiflow pump with a low pressure regulator, the bike carbs need about 2psi (a lot less than Weber).

1968 Ford Anglia 105e, 1.7 Zetec SE, Mk2 Escort Workd Cup front end, 5 link rear
Build Blog -

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply

go to top

Website design and SEO by Studio Montage

All content 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [ 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.