Ady.W
|
| posted on 11/11/11 at 08:33 PM |
|
|
MNR VORTEX HYABUSA KIT
I have a MNR Vortex RT + hyabusa kit with race front end and dry sump kit.
This was MNR demonstrator chasis they had at this years Newark show. I bought it after the show with everything need to complete the car to a very
high standard. The car is about 50% complete and all the work so far has been completed by MNR. As you can see from the build cost below, parts are
around 17K + the build cost so far from MNR.
I negotiated a discount and paid 13.5K for the kit and have since returned the exhaust and manifold so the car owes me 12.5K. I am prepared to take a
small hit to get my leg out but not much. If it doesent sell within 2 weeks I will get a local specialist to complete the car and track it next
year.
I may consider a part ex with money either way but the part ex car would need to take a 6'5" driver.
If anyones interested I will try to post photos of the kit and the car in its current build state when I figure out how.
DESCRIPTION PRICE COMMENTS
RT PLUS KIT 4450 MNR ROSSI BLUE /BLACK AS DISCUSSED
HAYABUSA 2500 MNR / YORKSHIRE ENGINES
DRY SUMP KIT 1084 SDB with scavenge pump. OS-DSK-BUSA-01
DRY SUMP TANK 284.65 SDB OS-DS-TK-5.00-12.00
NEW SUMP GASKET 11.58 SDB GSK-SUZ-H-SMP
ELECTRIC WATER PUMP 170.12 SDB WT-PM5-EWP-1B
ENGINE BREATHER PLATE 57.6 SDB-DS-BUSA-BREATHER-01
CLUTCH SLAVE CYLINDER 147 SDB CLT-HCA-BUSA-01K
HAYABUSA BILLET CLUTCH CENTER 210 SDB CLT-BUSA-HD-BILLET-CENTRE
CLUTCH HEAVY DUTY SPRING SET 50.4 SDB CLT-BUSA-HD-SPR-TURBO
RACE CAGE/SIDEBARS 695 MNR
ELECTRIC REVERSE 350 MNR
PADDLESHIFT 325 MNR
POWERCOMMANDER 255 MNR
RACE FRONT END 975 MNR COMPLETE
2XPADDED SEATS 360 BLACK WITH BLUE PIPING
15 INCH DYNAMICS PRORACE 1.2 WHEELS 875 WITH R888 TYRES-
1 X SEAT SLIDER 35
PROPSHAFT 295 TORQUE TUBE FITTED
C/F LOOK FRONT LIGHTS 125
ALL REAR LIGHTS 150
FRONT AND SIDE INDICATORS 45 C/F EFFECT
FULL SET SAVAGE SWITCHES 195 AND IGNITION KEYS
2 X SEAT BELTS 115 BLACK
3 X RACETECH MIRRORS 59
REAR DRIVETRAIN COMPLETE 700 3.38 DIFF-INCLUDES ALL DONOR PARTS
SILENCER AND FITTINGS 0 SENT BACK TO MNR NOT HAPPY WITH QUALITY
ROAD MANIFOLD 0 SENT BACK TO MNR NOT HAPPY WITH QUALITY
NEW RADIATOR AND SWITCH 275 4 CORE
FAN AND BRACKET 49
HEADER TANK AND CAP 85
COOLANT PIPES 150
FUEL PUMP 99
CUT OFF SWITCH 29
DIGIDASH-BLACK 425
ROLL OVER VALVE 29
BATTERY 60
HANDBRAKE ASSEMBLY 59
FUEL SENDER 26
HORN 12
FUEL FILLER KEYS PIPE 77
STEERING WHEEL/Q/R BOSS 137 D SHAPE
BONNET CATCHES 50
DISC ADAPTOR PLATES 35
PEDAL BOX COMPLETE 255
CLUTCH CABLE 55
THROTTLE CABLE 31
MNR LOOM 199
THATCHAM ALARM 65
BONNET SCOOP 70 BLACK
FLYSCREEN 0 FOC
16791.35
BUILD TO DATE 1200 MNR LABOUR TO GET CAR TO THIS STAGE
17991.35
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
daniel mason
|
| posted on 11/11/11 at 08:50 PM |
|
|
Why not complete it yourself? If funds are tight
|
|
|
Ady.W
|
| posted on 11/11/11 at 09:01 PM |
|
|
Time is the issue not money. I was kidding myself that I had the time to build the car.
|
|
|
daniel mason
|
| posted on 12/11/11 at 08:36 AM |
|
|
Same as me mate. I thought I'd complete it in 8 months. I'm now 18 months into it and still not quite ready for iva
|
|
|
Ady.W
|
| posted on 12/11/11 at 08:53 PM |
|
|
Car to date. Engine lifted for Dry sump mod.
 [/img]
[Edited on 12/11/11 by Ady.W]
|
|
|
Ady.W
|
| posted on 12/11/11 at 08:58 PM |
|
|
Car and body panels.
[img] [/img]
[Edited on 12/11/11 by Ady.W]
|
|
|
Ady.W
|
| posted on 12/11/11 at 09:00 PM |
|
|
Colour scheme when finished.
[img] [/img]
|
|
|
Ady.W
|
| posted on 12/11/11 at 09:02 PM |
|
|
All parts still boxed
[img] [/img]
|
|
|
daniel mason
|
| posted on 12/11/11 at 09:24 PM |
|
|
Are your wheels all same width as some look like they are on wrong side! Hope they are all 7"x15" so you can swap em over
|
|
|
spdpug98
|
| posted on 12/11/11 at 09:35 PM |
|
|
quote:
Originally posted by Ady.W
Colour scheme when finished.
[img][/img]
Great colour scheme 
Where did you get the picture as I have never seen that one before
My Blog: http://spdpug98.wordpress.com/
|
|
|
laptoprob
|
| posted on 12/11/11 at 09:57 PM |
|
|
Cant believe it Ady..... after all the initial boll....s you went through now its up for grabs!!
Are you going away from it totally or just going for a built version?
Rob.
http://www.youtube.com/watch?v=ajlF4nWJtGA
|
|
|
daniel mason
|
| posted on 13/11/11 at 04:07 PM |
|
|
It looks a good package for someone!
|
|
|
laptoprob
|
| posted on 13/11/11 at 05:32 PM |
|
|
Reckon its about asd good as it gets for the money.
http://www.youtube.com/watch?v=ajlF4nWJtGA
|
|
|
Ady.W
|
| posted on 13/11/11 at 08:21 PM |
|
|
Rob/Daniel
Going to give it till the end of the month to try and sell. If it does I will buy something ready to track if it dont I will give it to the guys at
Mac#1 or someone to finish for me ready for next season.
Dont know how you could tell the wheels are on the wrong way round from that photo but your right, I just threw them on last night to take a photo. I
didnt know myself I had 2 x 205 and 2 x 195 oops.
Thanks
Ady
|
|
|
amalyos
|
| posted on 13/11/11 at 08:38 PM |
|
|
quote:
Originally posted by Ady.W
Dont know how you could tell the wheels are on the wrong way round from that photo but your right
Tyre direction 
Shame you can't finish it, it looks like it could be an awsome car.
[Edited on 13/11/11 by amalyos]
http://stevembuild.blogspot.com
|
|
|
daniel mason
|
| posted on 13/11/11 at 09:21 PM |
|
|
Nearside front is correct way round. Nearside rear wrong way round.
|
|
|
Johneturbo
|
| posted on 13/11/11 at 09:29 PM |
|
|
Does look like a great spec, part of me is tempted to build another one and i'd only go for a Busa or ZZR14 for an engine
just out in interest why would you get mac#1 to finish it and not MNR who obviously know the car
|
|
|
Ady.W
|
| posted on 14/11/11 at 07:16 AM |
|
|
With out going into too much detail, I had a dispute with MNR when I bought the car and I find the lads at Mac# 1 easier to communicate with + they
are on my doorstep so I could keep an eye on the project.
|
|
|
laptoprob
|
| posted on 14/11/11 at 07:47 AM |
|
|
Sounds like a plan mate. Better get my new engine in before next year then or i`ll be playin catup
http://www.youtube.com/watch?v=ajlF4nWJtGA
|
|
|
brookie
|
| posted on 14/11/11 at 04:50 PM |
|
|
quote:
Originally posted by Ady.W
With out going into too much detail, I had a dispute with MNR when I bought the car and I find the lads at Mac# 1 easier to communicate with + they
are on my doorstep so I could keep an eye on the project.
if u need some help m8 look like in only down the road from u
|
|
|
Johneturbo
|
| posted on 14/11/11 at 04:56 PM |
|
|
Fair enough, i hope you get it built will be a cracking road/track car
|
|
|
Ady.W
|
| posted on 18/11/11 at 07:42 PM |
|
|
Best offers invited over 10K
|
|
|
daniel mason
|
| posted on 19/11/11 at 01:28 PM |
|
|
This would be a fantastic buy for someone who is wanting to build a new mnr. Mega savings on a new kit price! If I wasn't in The middle of a
build I'd be coming round for a look
[Edited on 19/11/11 by daniel mason]
|
|
|
Ady.W
|
| posted on 27/11/11 at 05:28 PM |
|
|
Bump
|
|
|
Ady.W
|
| posted on 5/12/11 at 12:06 PM |
|
|
Sold
Thanks for all the interest.
The car is now sold.
Good look to Daniel with the build.
|
|
|
