Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Heinz 57 Steering column Bits Identification
Edwardo

posted on 26/3/20 at 09:37 PM Reply With Quote
Heinz 57 Steering column Bits Identification

Evening all,

Finally got the weird/crap steering column bits out to check (slight play in the column).

It's clearly a home bodge but I'm trying to work out what bits he might have used.

It looks like he has cut off a proper column and then welded a smaller dia splined shaft for the top section. Does anyone recognise the column (outer or inner) at all please? It looks like a standard Escort inner column from the wheel down the welded part? - albeit with a bodged stripped thread for the steering wheel nut?:-

























Any help gratefully appreciated!

Cheers
Tony

View User's Profile E-Mail User View All Posts By User U2U Member
rusty nuts

posted on 27/3/20 at 06:22 AM Reply With Quote
Personally I would scrap it and start afresh! If the steering rack is an Escort item then the lower joint is easily available as are column extensions, various columns have been used , my own was a Sierra part attached to a home modified lower extension . The important part, whatever you use ,is a self collapsing section and to use decent mounting brackets and if your not confident modifying and welding get a good welder to do the job .
View User's Profile View All Posts By User U2U Member
cliftyhanger

posted on 27/3/20 at 07:56 AM Reply With Quote
I can only see one weld on the inner column. Looks like a telescopic column that has been welded to a fixed length?
Yes, the threads appear damaged, and I don't like the non-telescopic nature of the column.
It does have a bit of a BL look to it, mini or Triumph. But then again most columns look very similar!

View User's Profile View All Posts By User U2U Member
Edwardo

posted on 27/3/20 at 08:21 AM Reply With Quote
Spot on Cliftyhanger! Just googled classic mini steering column and that's exactly what it is! He has cut that and welded a standard 'off the shelf' splined steering rod to it. Many thanks for identifiying - that's exactly what I was after!

It's the top bush that's worn - and I can now replace it knowing what it is. That's all I wanted for now - just get it 'safe' again and use it for a bit through the summer.

Also thanks Rusty Nuts - The longer term plan (during the winter) is to junk the whole column and fit an MX5 one so it's done properly. I just didin't want to miss out on a bit of summer fun having just bought it.

In fact the Winter plan now - is to completely strip it down to the bare chassis. Blast/rust treat/re-paint the chassis and then build it back up properly and safely as I don't trust anything the last few builders/bodgers have done to it. Will completely re-do the wiring too as the ignition switch starting smoking the other day and the battery voltage is being dragged down

Many thanks again for your help chaps!

Cheers
Tony

View User's Profile E-Mail User View All Posts By User U2U Member
steve m

posted on 27/3/20 at 09:52 AM Reply With Quote
There are certain items on cars, that a compromise is NOT an option
Steering and brakes are at the very top, but the list will be a long one, that will end with a fluffy dice hanging on the mirror!

The OP has obviously got concerns with some of the build quality, (as I would of) and if there was an ounce of doubt in any part
then I would bin it and start afresh,

I personally would not be happy driving a car, that had issues like this steering column, nor some of the other faults mentioned

Perhaps delaying putting the car on the road this year, and doing a complete rebuild would be the best option,

Just my opinion,

regards

steve





Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at




View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [ 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.