Printable Version | Subscribe | Add to Favourites
New Topic New Reply
Author: Subject: Haynes roadster A-arm mount spacer?
falcor75

posted on 3/6/19 at 04:57 PM Reply With Quote
Haynes roadster A-arm mount spacer?

On page 49 is shown a yellow spacer for the front end forward upper A-arm mounts, I cantt find any mention of a thickness of it tho?
Does anyone know?

View User's Profile Visit User's Homepage View All Posts By User U2U Member
johnhsmith

posted on 4/6/19 at 03:12 PM Reply With Quote
The front upright in fig 4.25 slopes back from the bottom. The spacer just holds the frame horizontal away from the sloping upright, so as long as it's thick enough to do that it's not critical. See the top left bracket on the bottom diagram in fig 4.22 on page 47, I think that shows what I mean. This is how I read it.

Hope this helps

John

View User's Profile View All Posts By User U2U Member
falcor75

posted on 4/6/19 at 05:18 PM Reply With Quote
Yes I just realized that now when I started setting up the mounts and took a closer look at the dimensions and where they were originated from.
A small stack of washers worked fine.

[Edited on 4/6/19 by falcor75]

View User's Profile Visit User's Homepage View All Posts By User U2U Member

New Topic New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.