Printable Version | Subscribe | Add to Favourites
New Topic New Reply
Author: Subject: SVA build information
merlin

posted on 13/12/01 at 06:15 PM Reply With Quote
SVA build information

Does anyone have the correct height from the ground to the top of the seat belt anchorages? I am fitting 4 point harnesses and the book doesn't give a height but I know there is a minimum for the SVA.
Same question goes for headlights, what is the maximum/minimum height?

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
richlhart

posted on 14/12/01 at 10:46 PM Reply With Quote
I'm not too sure about the seatbelts. However the "Car Builder's Manual" states that......
"The lowest point of the headlight must not be less than 500mm........highest point must not be more than 1200mm"

View User's Profile E-Mail User View All Posts By User U2U Member
mad-butcher

posted on 8/4/02 at 08:16 PM Reply With Quote
they place a block on the seat where it joins the back the block comes forward 136mm and is 53mm high the minimum reference height for the top mount above this point is 450mm generaly it means most locosts need the back rail mount raising about an inch
tony

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member

New Topic New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.