Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Mx5 Ignition barrel HELP
kevyo89

posted on 10/6/19 at 09:33 PM Reply With Quote
Mx5 Ignition barrel HELP

Hoping someone in this group can help - I'm fitting the ignition barrel from a mk2.5 mx5 1.8 VVT to my car and I'm having difficulties figuring out what the terminals on the barrel mean (and where my battery live/ignition/starter wires go).

There are the following positions on the key barrel:

- Off
- Accessory
- Ignition on
- Start

Is anyone able to help/advise on where I should position/join my three wires to this barrel?



[Edited on 10/6/19 by kevyo89]

View User's Profile View All Posts By User U2U Member
paulc

posted on 11/6/19 at 05:46 PM Reply With Quote
This is what I concluded with my MX5 ignition switch.
(I'm not sure if its a Mk2 or a Mk2.5 of if theres a difference)

Description
Description


I've had the car started so i'm fairly happy its correct

Paul C

View User's Profile View All Posts By User U2U Member
kevyo89

posted on 11/6/19 at 05:57 PM Reply With Quote
quote:
Originally posted by paulc
This is what I concluded with my MX5 ignition switch.
(I'm not sure if its a Mk2 or a Mk2.5 of if theres a difference)

Description
Description


I've had the car started so i'm fairly happy its correct

Paul C


Thank you mate, that's a good help but can you just confirm what that means in terms of wiring position? Where did you connect each wire?

View User's Profile View All Posts By User U2U Member
paulc

posted on 11/6/19 at 06:18 PM Reply With Quote
No worries.

B1, B2 are connected together to a fused 12V feed. (Battery Live)

ACC currently nothing connected, but I'll probably add a USB power socket for my phone/sat nav powered from the connection

IG1 is my switched 12V to everything. (Ignition)

IG2 currently nothing connected. I think on the MX5 its used for things like the rear screen demister

START is connected to the solonoid on the started motor.

Paul C

View User's Profile View All Posts By User U2U Member
kevyo89

posted on 11/6/19 at 06:35 PM Reply With Quote
quote:
Originally posted by paulc
No worries.

B1, B2 are connected together to a fused 12V feed. (Battery Live)

ACC currently nothing connected, but I'll probably add a USB power socket for my phone/sat nav powered from the connection

IG1 is my switched 12V to everything. (Ignition)

IG2 currently nothing connected. I think on the MX5 its used for things like the rear screen demister

START is connected to the solonoid on the started motor.

Paul C


Thanks Paul - and you've not had any issues with it like that so far?

View User's Profile View All Posts By User U2U Member
paulc

posted on 11/6/19 at 06:53 PM Reply With Quote
The car isn't on the road yet.

Ive had the engine running, and checked out all of the electrics so I'm pretty happy with it.

I wasn't sure how much current I could draw through the IG1 terminal so anything that uses a significant ammout of power I've used a relay.

View User's Profile View All Posts By User U2U Member
miskit

posted on 11/6/19 at 11:03 PM Reply With Quote
Oh and important - see that little connector with the twisty wires in your pic- that's not the key left in alarm - it's the immobiliser chip reader.
You can guess how I know!

EDIT - just realised you are fitting the MX5 barrel to a car, not the other way round..

[Edited on 11/6/19 by miskit]

View User's Profile View All Posts By User U2U Member
kevyo89

posted on 11/6/19 at 11:08 PM Reply With Quote
quote:
Originally posted by miskit
Oh and important - see that little connector with the twisty wires in your pic- that's not the key left in alarm - it's the immobiliser chip reader.
You can guess how I know!

EDIT - just realised you are fitting the MX5 barrel to a car, not the other way round..

[Edited on 11/6/19 by miskit]


Yeah mate I had a full custom loom made but wanted to retain the original mx5 ignition barrel mounted to the steering column

View User's Profile View All Posts By User U2U Member
dnmalc

posted on 14/10/19 at 05:04 AM Reply With Quote
You may want to put the radio if fitted on accessories.
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.