smdl
|
| posted on 4/2/07 at 05:46 AM |
|
|
Zetec Engine Mounts
I am in the process of building mounts using 3mm plate bolted to the engine and welded to 2" square 3mm wall tubing down to the chassis (where
is sits on a rubber mount). What I am wondering is if 3mm plate for the engine flange is enough, or if I should be using something like 6mm plate?
Thanks,
Shaun
[Edited on 4/2/07 by smdl]
|
|
|
|
|
theconrodkid
|
| posted on 4/2/07 at 06:57 AM |
|
|
i used 3mm on both my previous cars,never had a prob
who cares who wins
pass the pork pies
|
|
|
ecosse
|
| posted on 4/2/07 at 09:57 AM |
|
|
Yep, 3mm for me too
Cheers
Alex
|
|
|
jollygreengiant
|
| posted on 4/2/07 at 04:03 PM |
|
|
Ok its a pinto not a zetec but heres what I've just finished. (a pair of them, drivers side shown but nearside is
simmilar)..jpg)
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
|
smdl
|
| posted on 4/2/07 at 04:50 PM |
|
|
Well, it looks like 3mm has been used successfully.
Onward!
Shaun
|
|
|
