MT75 Gearbox and prop for Zetec
This was fitted in a Westfield with a 2.0 silver top zetec that had covered 12’000 miles, no issues and it seems to be in very good condition. Complete with release arm, clutch release bearing with spacer, mount bushes, cables, and prop shaft with 6 bolt rubber coupling and gasket etc so it's ready to drop in and use. £230 collected
Starter motor for zetec, o/s position, sold to me as new but I have not used it. £35
Burton alloy bellhousing. Ford 4 cylinder to Type E etc, starter on o/side. Great condition. £90
Kit car steering rack 2.4 turns. Ex-escort rack, length has been extended to fit a kit car, the ends have been sleeved, welded and pinned. 98cm between threads, 5cm thread each side. £60
British Leyland, Marina, Ital, Truimph, Caterham 3.89-1 diff. Unused for about 30 years, it was kept as a spare for my caterham but I never used, from what I can tell it feels very good but will obviously need a clean out £80
British Leyland, Marina, Ital, Truimph, Caterham 4.1-1 diff. As the diff above, unused by me, kept as a spare and also feels like its in good condition. £80
N/s exhaust can, used on Westfield, has been cut and repacked at some point in its life, not the prettiest but usable - £10
