CRAIGR
|
| posted on 3/3/17 at 07:22 PM |
|
|
Striker pinto engine mounts
Testing the water
Anyone got some Striker pinto engines mounts gathering dust .
Please pm me
|
|
|
|
|
obfripper
|
| posted on 3/3/17 at 09:48 PM |
|
|
Are they the same as crossflow ones? Escort xf ones work on a pinto in an escort, but i'm not sure with a striker if the same applies.
I have sylva crossflow ones knocking about somewhere, if they're of any use make me an offer.
I take it you've got the later chassis with rubber bobbin mounts bolted flat to the chassis?
If you have the early chassis with welded in cradles for original escort mounts, it should be ok with a pinto on xf mounts, iirc the pinto is slightly
wider so different rubber bobbins may be needed to locate correctly.
Dave
|
|
|
CRAIGR
|
| posted on 3/3/17 at 10:15 PM |
|
|
Hi Dave
Would be for the later chassis without the cradles
|
|
|
benchmark51
|
| posted on 3/3/17 at 10:17 PM |
|
|
I replaced a xflow engine in my locost with a pinto using the same mounts, no problem. I had bought the aluminium sierra mounts and bobbins but
didn't need them.
|
|
|
wylliezx9r
|
| posted on 3/3/17 at 10:29 PM |
|
|
Pinto in a Stryker......... Sacrilege
I spent a lot of money on booze, birds and fast cars. The rest I just squandered.
George Best
|
|
|
benchmark51
|
| posted on 4/3/17 at 09:45 AM |
|
|
Go on, Strykers aren't that bad.
|
|
|
wylliezx9r
|
| posted on 4/3/17 at 10:29 AM |
|
|
quote:
Originally posted by benchmark51
Go on, Strykers aren't that bad.
I spent a lot of money on booze, birds and fast cars. The rest I just squandered.
George Best
|
|
|
pekwah1
|
| posted on 4/3/17 at 12:21 PM |
|
|
I've got some from a CVH, dunno if these are any good?
|
|
|
