Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Rear lower wishbone dimension correct?
locost7-online.com

posted on 12/4/15 at 09:13 PM Reply With Quote
Rear lower wishbone dimension correct?

I've just redrawn the tiger wishbones so I can start to fabricate some, whilst I was checking dimensions of the lower wishbone to hub carrier there is a dim of 100 mm between bush tubes and Also 100mm width of hub carrier, so what about the thickness of bush?





Locost Xflow 150bhp injected! Sold :-(

Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.

View User's Profile E-Mail User View All Posts By User U2U Member
Slimy38

posted on 13/4/15 at 05:22 AM Reply With Quote
The crush tube bolts solid against the hub carrier, the bush then fits around it. The outer tube on the wishbone should be slightly smaller to fit the 'brim' of the top hat.

So 100mm carrier and 100mm between tubes sounds correct to me, as long as they're referring to the crush tubes.

View User's Profile View All Posts By User U2U Member
locost7-online.com

posted on 13/4/15 at 06:08 AM Reply With Quote
The dim is the outside bush tube , not the crush tube





Locost Xflow 150bhp injected! Sold :-(

Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.

View User's Profile E-Mail User View All Posts By User U2U Member
neilp1

posted on 13/4/15 at 04:53 PM Reply With Quote
These are the bushes for the bottom wishbones.

http://www.tigerracing.com/zencart/index.php?main_page=product_info&cPath=60&products_id=218

View User's Profile View All Posts By User U2U Member
locost7-online.com

posted on 13/4/15 at 07:30 PM Reply With Quote
In the new edition of the book it shows the top hat type bushes on page 95 which is confusing me, I've adjusted the distance between the bush tubes to allow an extra 9 mm for the top hats





Locost Xflow 150bhp injected! Sold :-(

Facebook blog https://www.facebook.com/Johns-Tiger-Avon-Build-814223212056368/
PLEASE NOTE THIS MEMBER IS NOT A TRADER.

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [ 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.