hazardpro
|
| posted on 29/11/16 at 10:20 PM |
|
|
Strong petrol spell
Is that common on kit cars?
Normally just on the day of running the car... the garage stinks of gas. Wouldnt mind but garage is connected to house so you can spell it in the
house too.
No leaks visible....
Doug
|
|
|
|
|
cliftyhanger
|
| posted on 29/11/16 at 10:31 PM |
|
|
Check the rubber fuel hoses. If they are not r9 or above grade they may be letting fuel seep through them.
And no, it is not bormal for any car to stink of petrol. If it does,their is a leak/issue somewhere.
|
|
|
ian locostzx9rc2
|
| posted on 29/11/16 at 10:37 PM |
|
|
If the engines running carbs it will smell if it's running injection it shouldn't really .
|
|
|
hazardpro
|
| posted on 29/11/16 at 10:40 PM |
|
|
Injectors.. 2l zetec turbo...
Hmm ok will have a look around. I know the hoses under the hood are all ok - so maybe I need to check fuel tank end...
|
|
|
Hodor
|
| posted on 29/11/16 at 11:02 PM |
|
|
Check for leaks with a match
|
|
|
Hodor
|
| posted on 29/11/16 at 11:02 PM |
|
|
Joke btw
|
|
|
cliftyhanger
|
| posted on 30/11/16 at 06:44 AM |
|
|
Do you have braided fuel hoses? they often seem to be poor quality hoses but you can't see the rubber, so you don't know they are porous.
Nasty.
|
|
|
Irony
|
| posted on 30/11/16 at 08:54 AM |
|
|
Petrolysisi Aycarambra!
|
|
|
David Jenkins
|
| posted on 30/11/16 at 10:54 AM |
|
|
A subject that was close to my heart, after replacing hoses several times because of the stink of petrol in the garage...
Linky
|
|
|
DJT
|
| posted on 30/11/16 at 12:27 PM |
|
|
Tank breather not fitted with a valve?
http://tigeravonbuilddiary.blogspot.com/
|
|
|
SteveWallace
|
| posted on 1/12/16 at 01:27 PM |
|
|
I had the same problem and eventually traced it to a weep in one of the welds on the fuel tank. It was only noticeable when the tank was more than
half full as it was quite high up. Easily fixed from the outside with some plastic metal putty.
|
|
|
rusty nuts
|
| posted on 1/12/16 at 06:25 PM |
|
|
Talcum powder is a good way to find leaks, just liberally sprinkle any suspect areas , the powder will change colour if any seepage is found
|
|
|
.jpg)
