Printable Version | Subscribe | Add to Favourites
<<  1    2  >>
New Topic New Poll New Reply
Author: Subject: Westfield Zetec Exhaust System - MT75 +prop - Zetec starter - Burton bellhousing - Vintage Revolutions - Revolution Copy - Kit C
OwenSP

posted on 20/5/17 at 02:12 PM Reply With Quote
Westfield Zetec Exhaust System - MT75 +prop - Zetec starter - Burton bellhousing - Vintage Revolutions - Revolution Copy - Kit Car Rack

Hi Guys, have some items to sell below. I'm not too sure on what to ask for these so if my prices are too high/too low please give me heads up via U2U.

Located in Iver Heath, South Bucks


Complete Westfield 2.0 zetec exhaust system -

Manifold was purchased from Westfield a few years ago, used but in great condition as can be seen from the pictures. It's stainless steel so will polish up a treat and it has the Westfield/stamp logo on it. £365 new from WF, asking £240

Silencer is a nice solid bit of kit, repackable 6 inch, small scrap underneath but not visible when in position - £140

http://parts-shop.westfield-sportscars.co.uk/index.php?route=product/product&product_id=197&search=zetec+exhaust












MT75 Gearbox and prop for Zetec

This was fitted in a Westfield with a 2.0 silver top zetec that had covered 12’000 miles, no issues and it seems to be in very good condition. Complete with release arm, clutch release bearing with spacer, mount bushes, cables, and prop shaft with 6 bolt rubber coupling etc so it's ready to drop in and use. £300 collected








Starter motor for zetec, o/s position, sold to me as new but I have not used it. £offers




N/s exhaust can, used on Westfield, has been cut and repacked at some point in its life, not the prettiest but usable - £20




Burton alloy bellhousing. Ford 4 cylinder to Type E etc, starter on o/side. Great condition. £offers





4 Revolution copy alloy wheels. Ford fitment 108pcd with 100mm backspace. In need of a refurb - £40 collected



3 original vintage Revolution alloys. 13x7” Ford fitment, 4” backspace. Classic design in need of a refurb. £90 collected






Kit car steering rack 2.4 turns. Ex-escort rack, length has been extended to fit a kit car, the ends have been sleeved, welded and pinned. 98cm between threads, 5cm thread each side. £60 collected








[Edited on 20/5/17 by OwenSP]

[Edited on 22/5/17 by OwenSP]

[Edited on 22/5/17 by OwenSP]

Is this a TRADE ADVERTISEMENT?? Click HERE to report it!

View User's Profile View All Posts By User U2U Member
cr500dom

posted on 20/5/17 at 08:51 PM Reply With Quote
Would the bellhousing work with a type 9 do you know ?
View User's Profile View All Posts By User U2U Member
OwenSP

posted on 21/5/17 at 11:18 AM Reply With Quote
I believe if it fits a type E it will fit a type 9, I will check the Burton catalogue and get back to you.
View User's Profile View All Posts By User U2U Member
dhutch

posted on 22/5/17 at 12:41 PM Reply With Quote
First dibs on the manifold please, if it will fit a narrowbody?

U2U sent.


Daniel

View User's Profile E-Mail User View All Posts By User U2U Member
rusty nuts

posted on 22/5/17 at 01:10 PM Reply With Quote
Location?
View User's Profile View All Posts By User U2U Member
OwenSP

posted on 22/5/17 at 01:14 PM Reply With Quote
Apologies - located in Iver Heath, South Bucks
View User's Profile View All Posts By User U2U Member
lordbenny

posted on 27/5/17 at 07:37 PM Reply With Quote
Can you let me know how much you want for the starter motor posted to SW London?
View User's Profile View All Posts By User U2U Member
Andybarbet

posted on 27/5/17 at 08:03 PM Reply With Quote
What size are the 4 revolution copies ? Cheers





Give a man a fish & it will feed him for a day, give him a fishing rod & you've saved a fish.

View User's Profile View All Posts By User U2U Member
olimarler

posted on 28/5/17 at 06:37 AM Reply With Quote
Interested in what size the copies are too?
View User's Profile View All Posts By User U2U Member
AndyGilbert

posted on 28/5/17 at 11:44 AM Reply With Quote
revolution wheels

Hi, interested in those revolution 7x13's, can collect on my way home from work, so when would be best?. I'll try and send a message

If I do manage to make contact and buy, does anybody in Herts/Cambs want anything bringing up?

[Edited on 28/5/17 by AndyGilbert]





c20xe HPC Caterham just sitting here waiting for the sun to shine.

View User's Profile E-Mail User View All Posts By User U2U Member
OwenSP

posted on 29/5/17 at 10:27 AM Reply With Quote
U2Us sent and replied to.

The revolution copies are 13x6

[Edited on 29/5/17 by OwenSP]

View User's Profile View All Posts By User U2U Member
OwenSP

posted on 30/5/17 at 06:05 PM Reply With Quote
Open to offers

Exhaust and manifold together £320

View User's Profile View All Posts By User U2U Member
Andybarbet

posted on 30/5/17 at 07:39 PM Reply With Quote
U2U' d regarding the revolution copy wheels .

Cheers





Give a man a fish & it will feed him for a day, give him a fishing rod & you've saved a fish.

View User's Profile View All Posts By User U2U Member
AndyGilbert

posted on 30/5/17 at 08:20 PM Reply With Quote
I'm collecting parts on Friday, I live North of Cambridge and travelling home via Broxbourne Herts (A10) so if anyone is buying and wants me to bring it back for the weekend let me know.





c20xe HPC Caterham just sitting here waiting for the sun to shine.

View User's Profile E-Mail User View All Posts By User U2U Member
OwenSP

posted on 30/5/17 at 09:19 PM Reply With Quote
U2U replied

**Revolutions 13x7 sold pending pick up**

View User's Profile View All Posts By User U2U Member
OwenSP

posted on 15/6/17 at 04:41 PM Reply With Quote
All wheels sold, open to offers on everything else
View User's Profile View All Posts By User U2U Member
starterman

posted on 15/6/17 at 07:32 PM Reply With Quote
Would you be able to send the exhaust and silencer? Or even wrap it so that I could send in a courier to collect?
View User's Profile View All Posts By User U2U Member
nero1701

posted on 15/6/17 at 08:32 PM Reply With Quote
Would you concider posting the rack ?
View User's Profile View All Posts By User U2U Member
OwenSP

posted on 18/6/17 at 03:35 AM Reply With Quote
I'm sure I could wrap/package the exhaust and mani if you were to organise a courier. Could probably do the same for the rack.
View User's Profile View All Posts By User U2U Member
stevet

posted on 23/6/17 at 05:28 PM Reply With Quote
Zetec manifold

Hi there - is your zetec manifold still for sale? Thanks.
View User's Profile View All Posts By User U2U Member
trevturtle

posted on 24/6/17 at 04:03 AM Reply With Quote
U2U sent for bell housing and starter

Thanks

View User's Profile View All Posts By User U2U Member
OwenSP

posted on 26/6/17 at 09:21 AM Reply With Quote
Hi guys, I've been away for the last few weeks and will reply to all your U2U messages shortly.

The manifold and exhaust are provisionally sold.

View User's Profile View All Posts By User U2U Member
OwenSP

posted on 1/7/17 at 11:24 AM Reply With Quote
Manifold and exhaust now sold.



Still available:

1. MT75 Gearbox and prop for Zetec complete with release arm, clutch release bearing with spacer, mount bushes, cables, and prop shaft with 6 bolt rubber coupling etc so it's ready to drop in and use. £300ono collected

2. Starter motor for zetec, o/s position, new. £40

3. N/s exhaust can, used on Westfield, has been cut and repacked at some point in its life, not the prettiest but usable - £10 collected

4. Burton alloy bellhousing. Ford 4 cylinder to Type E etc, starter on o/side. Great condition. £offers

5. Kit car steering rack 2.4 turns. Ex-escort rack, length has been extended to fit a kit car, the ends have been sleeved, welded and pinned. 98cm between threads, 5cm thread each side. £60 collected



Photos no longer work because the website has changed their rules. Please contact me if you are interested in something and i can send pics..

View User's Profile View All Posts By User U2U Member
OwenSP

posted on 16/7/17 at 06:51 PM Reply With Quote
bump
View User's Profile View All Posts By User U2U Member
OwenSP

posted on 29/7/17 at 10:30 PM Reply With Quote
bump
View User's Profile View All Posts By User U2U Member
<<  1    2  >>
New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.