Printable Version | Subscribe | Add to Favourites
<<  1    2  >>
New Topic New Poll New Reply
Author: Subject: Cad file for electric reverse gear wheel
MartinLindberg

posted on 16/10/18 at 02:19 PM Reply With Quote
Hi!
Have you seen kitcar directs version of the gear? They have a hollow inside and the Diff and propshaft is Only sandwiched on like 5mm surface around the gear. Why is it like that? Is it really safe? Worried that the bolts Will come loose
/Martin

View User's Profile View All Posts By User U2U Member
feckn7

posted on 16/10/18 at 10:43 PM Reply With Quote
I drew a reverse gear for a friend for his T89 Design single seater.
The gear is 140mm in diameter and bolts to the front of a Sierra diff.
I think he was using a commodore starter motor - seems that there are different pitches for different starters.
Here is a (very big) jpg of what it looks like


The dxf is at http://hansonconsulting.co.nz/CCC/ReverseGear10pitch.dxf

David

View User's Profile View All Posts By User U2U Member
feckn7

posted on 16/10/18 at 10:51 PM Reply With Quote
The problem with mounting the reverse gear on the front of the diff is - in my car anyway - that the diff nose is just inside the drive tunnel, so there is no room for the gear.
In my car I have designed a gear that will attach to the centre CV joint that I have in my driveshaft.

David

View User's Profile View All Posts By User U2U Member
<<  1    2  >>
New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.