Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: GSXR1000 clutch actuator
JAA

posted on 8/3/08 at 09:43 PM Reply With Quote
GSXR1000 clutch actuator

Anyone out there got some pics of the clutch cable fittings linked to the actuator? Having a nightmare getting something to work properly.
View User's Profile View All Posts By User U2U Member
motorcycle_mayhem

posted on 10/3/08 at 10:21 AM Reply With Quote
Hope this is what you need. Rescued attachment GSXR_clutchcover.JPG
Rescued attachment GSXR_clutchcover.JPG

View User's Profile View All Posts By User U2U Member
motorcycle_mayhem

posted on 10/3/08 at 10:28 AM Reply With Quote
Here's my hydraulic solution (the prop sprocket fouled any cut down attempts on the cable cover). Hewland cylinder. This works very well on my GSXR750, 1000 and 1300 cars. Rescued attachment Hydraulic.jpg
Rescued attachment Hydraulic.jpg

View User's Profile View All Posts By User U2U Member
lococost

posted on 10/3/08 at 06:03 PM Reply With Quote
Here's my mechanical solution. (hydrolic should be smoother)



More pictures at the below

View User's Profile View All Posts By User U2U Member
JAA

posted on 12/3/08 at 09:04 PM Reply With Quote
GSXR1000 clutch actuator

Neat solutions to the problem but can't see how you can get the prop shaft in on the hydraulic option. I have spaced the actuator out of the existing sprocket cover and made up a bracket but does not work successfully. One of the problems is how much effort is required to actuate the clutch which actually broke the universal cable MK sold me. They told me just to make a bracket up and use the existing adjuster hole as the mounting on the sproket housing?
View User's Profile View All Posts By User U2U Member
motorcycle_mayhem

posted on 12/3/08 at 10:43 PM Reply With Quote
Fits no problem (and this is the smaller 750 version too). Rescued attachment view.JPG
Rescued attachment view.JPG

View User's Profile View All Posts By User U2U Member
icecarver

posted on 17/3/08 at 05:48 PM Reply With Quote
hydraulic clutch

We purchased a stuart taylor racing , hydralic
clutch kit.
Good engineering and works well

View User's Profile View All Posts By User U2U Member
dunk3

posted on 17/3/18 at 12:59 PM Reply With Quote
I know it's a old post but has any one got a part number for these clutch cylinders that they used to modify the clutch set up on a Gsxr 1000 k2.
Cheers

View User's Profile E-Mail User View All Posts By User U2U Member
motorcycle_mayhem

posted on 17/3/18 at 02:55 PM Reply With Quote
The one I used (GSXR750-1000-1300) on my mounts in the picture is the standard Hewland cylinder. Off the shelf just about anywhere motorsporty, or Westfield (Megabusa).
I've probably still got the GSXR1000K2 mounts and cylinder somewhere, but a senior period prevails....

[Edited on 17/3/18 by motorcycle_mayhem]

View User's Profile View All Posts By User U2U Member
dunk3

posted on 17/3/18 at 03:08 PM Reply With Quote
Thanks for the reply , did you use the push rod from the hewland cylinder or the one from the standard cylinder. don't suppose you want to sell your old one.
View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.