eznfrank
|
| posted on 18/6/09 at 10:00 AM |
|
|
Anyone in the area around J27 of thge M62 fancy doing a small bit of welding for beer tokens?
Just wondering if there's anyone in the area around J27 of the M62 (Birstall), who would fancy doing a small bit of welding in exchange for
cash??
I had to cut out one of the diagonals where my exhaust exits my chassis and need it repositioning. There are now two smaller diagonals to go in
it's place. One from the bottom right of the chassis to the top middle area (ie just above the manfold) and another smaller one between where
the wishbone mounts and the top of the chassis. I've cut those to size and shape the ends so they are "thereabouts"
I've tried a few mobile places and none really seem interested. I may also need another tiny bit when I get my MNR reverse as I think it bolts
through the floor so may need some reinforcement or even a little platform for it to sit on.
[Edited on 18/6/09 by eznfrank]
|
|
|
|
|
carlgeldard
|
| posted on 18/6/09 at 12:48 PM |
|
|
TIG or MIG
U2U your contact details
Cheers Carl
|
|
|
