Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Raceline sump
Samuele

posted on 23/9/16 at 10:23 AM Reply With Quote
Raceline sump

You tell me any of you who mounted a 2.0 zetec engine with the oil sump raceline of the Fury if the cup comes out of the chassis ?
I mean , what is the lowest point of the car , the chassis or the oil sump ?

View User's Profile E-Mail User View All Posts By User U2U Member
Dusty

posted on 23/9/16 at 09:06 PM Reply With Quote
Don't know the specifics for a Fury but one point about the raceline sump is it bolts up flush with a type 9 bellhousing including the two lowest bolts and is flush horizontally with the bellhousing. i.e. it does not stick down any lower than the bottom of the bellhousing. I have one poor picture from when I fitted it. You can just about see the bellhousing and a sliver of the sump visible below the rail.
[img] sump
sump
[/img]

[Edited on 23/9/16 by Dusty]

View User's Profile E-Mail User View All Posts By User U2U Member
Samuele

posted on 23/9/16 at 09:17 PM Reply With Quote
ok, this is an information that can be enough.
thank you

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.