Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: AJ30 Jag engine / box install. Gear ratios?
magpies

posted on 23/7/18 at 10:29 AM Reply With Quote
AJ30 Jag engine / box install. Gear ratios?

Hi

I'm looking at fitting a Jag 3.0 V6 out of an S-Type along with a 5 or 6 speed manual gearbox.

I could do with knowing the gear ratios as I would then be able to work out what rear diff ratio I need

The existing ratio is a 4.2 (lsd) out of a Sierra, yes this is not ideal but the car was going to be used for sprints and hillclimbs

but now just going to be a road car. The existing engine is a BOA V6 Cossy and MT75 box which will be pulled and sold.

View User's Profile E-Mail User View All Posts By User U2U Member
40inches

posted on 23/7/18 at 04:02 PM Reply With Quote
If you are using the Jag Getrag box, a 3.62 will work well, a 3.3 is better for motorway cruising.
View User's Profile View All Posts By User U2U Member
magpies

posted on 18/10/19 at 05:51 PM Reply With Quote
cheers 40

I've put in the standard 3.64 that is usually fitted in the 7.5" diff - had the LSD swapped too.

'box is the early 5 speed Getrag 221

I'm using 8 x 17" wheels with 215/45/17 T1R's (may sell and fit Rainsport 3's)

I have a programmable speedo so no problem there.

View User's Profile E-Mail User View All Posts By User U2U Member
magpies

posted on 27/9/21 at 10:37 PM Reply With Quote
Update:

The 3.64:1 diff is OK, gives near enough 20 mph/1000 revs in 5th.

That equates to 3500 at 70 which is a little high but bearable and a theoretic 144 top speed

It seems to like 3800 on motorways but the exhaust is a little loud - have done Bridgwater to Teesside at that.

Driven 4500 miles this year up to now.

It pulls very well from 25 in top.

Although I do have the 3.14 ratio I will not be changing at the mo.

View User's Profile E-Mail User View All Posts By User U2U Member
CosKev3

posted on 28/9/21 at 03:19 PM Reply With Quote
I'm running a RX8 6 speed with a 3.14 diff and mines ticking over at 2800rpm at 80mph
Exactly as I planned with it,sixth gear is like a overdrive

View User's Profile View All Posts By User U2U Member
magpies

posted on 28/9/21 at 05:21 PM Reply With Quote
quote:
Originally posted by CosKev3
I'm running a RX8 6 speed with a 3.14 diff and mines ticking over at 2800rpm at 80mph
Exactly as I planned with it,sixth gear is like a overdrive


I think the RX8 'box is too wide for the TVR S chassis, not 100% so could do with the dimensions if available

View User's Profile E-Mail User View All Posts By User U2U Member
CosKev3

posted on 28/9/21 at 05:36 PM Reply With Quote
quote:
Originally posted by magpies
quote:
Originally posted by CosKev3
I'm running a RX8 6 speed with a 3.14 diff and mines ticking over at 2800rpm at 80mph
Exactly as I planned with it,sixth gear is like a overdrive


I think the RX8 'box is too wide for the TVR S chassis, not 100% so could do with the dimensions if available


It is a big box the 6 speed,much bigger than a Type9 gearbox.
Rx8 5 speed is much smaller than the 6 speed.
I've got a 5 speed I can measure up if you want?

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.