Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: OMEX rolling road in SE London / Kent
bi22le

posted on 18/6/20 at 05:36 PM Reply With Quote
OMEX rolling road in SE London / Kent

Evening all,

As I have made some radical changes to my inlet (some I am not sure are the best moves forward) I want to get the car on a rolling road. My main concern is air / fuel mix on the seperate cylinders.

It's been mapped and has run faultless for years but now I have a sealed inlet plenum which I think is boarderline too small in volume. This may cause fueling imbalance across the 4 cylinders or serious power curve issues.

So I need to identify a half decent rolling road that knows OMEX that can check my power delivery and fueling on all 4 individual cylinders.

Thanks in advance.





Track days ARE the best thing since sliced bread, until I get a supercharger that is!

Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1

Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I

View User's Profile View All Posts By User U2U Member
jeffw

posted on 18/6/20 at 06:41 PM Reply With Quote
Atspeed in Raleigh in Essex. Speak to Omex for suggestions might be an idea.
View User's Profile View All Posts By User U2U Member
bi22le

posted on 18/6/20 at 07:53 PM Reply With Quote
I have sent AtSpeed an email for availability and will call OMEX tomorrow. TBH there won't be much mapping required unless it goes really wrong. . . .





Track days ARE the best thing since sliced bread, until I get a supercharger that is!

Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1

Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I

View User's Profile View All Posts By User U2U Member
peter030371

posted on 19/6/20 at 08:27 AM Reply With Quote
Second for ATSpeed. They did a great job on my Striker, it went in rough as nails and came out purring like a kitten. They advised against the roller barrel TB I have as idle can be unstable but several years later it still idles perfectly

I will be going back for a remap once my new head is finished and fitted

edit to add I am also using an Omex ECU

[Edited on 19/6/20 by peter030371]

View User's Profile View All Posts By User U2U Member
bi22le

posted on 19/6/20 at 12:54 PM Reply With Quote
Yeah AtSpeed seem like winners, they are quite close to me, I pretty much pass their front door on the way to my Southend workplace!

I'm just waiting for some availability back, hopefully they can check the individual air/ fuel mix of each cylinder. I don't know how they will do that though!





Track days ARE the best thing since sliced bread, until I get a supercharger that is!

Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1

Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.