John Bonnett
|
posted on 14/2/08 at 06:33 PM |
|
|
Rolling Road in Devon/Cornwall
I collected the Phoenix from Mark Shillaber at SRD in Launceston this morning and I have to say how impressed I am with the job he has done. Mark
rebuilt my engine and so I had complete confidence in giving him the task of setting it up.
The upgraded ECU was completely remapped and the difference is incredible. The engine starts and ticks over beautifully and the power just keeps
coming in ever increasing amounts. Mark took his time in getting it absolutely right and hung on to the car for an extra day just to check the cold
starting. I am really pleased with what he has done and at a very reasonable cost too.
Incidentally, this was my very first drive of the car on the road. I trailered it there. I'll try to attach a photo and apologise that the car
is very dirty having been in and around Mark's workshop for the last ten days.
John
P.S Mark specialises in building Pinto engines for short circuit racing and told me that he had done 20 last month.
[Edited on 14/2/08 by John Bonnett]
|
|
|
alexdj125
|
posted on 14/2/08 at 07:57 PM |
|
|
Sounds good, I may pop my car there rather than Alan jefferies tuning who managed to make my car fail the SVA first time as they snapped the float
inside my carbs and forgot to tell me!
|
|
Dusty
|
posted on 14/2/08 at 09:18 PM |
|
|
Totally agree with both above posts. One to avoid like the plague and one to recommend.
|
|
motorcycle_mayhem
|
posted on 14/2/08 at 09:41 PM |
|
|
It's Cornwall (again) but Richards Bros have a damn good (single roller) road and the intelligence to use it. No connection, I'm just a
satisfied customer.
|
|
ANDYSHORT
|
posted on 14/2/08 at 10:38 PM |
|
|
MARK SHILLEBER
HI I CAN RECOMEND SRD HIGHLY, MARK IS A FANTASTIC ENGINEER HAS BUILT ME SOME FANTASTIC ENGINES IN THE PAST ,VERY HELPFULL AND CERTAINLY KNOWS HIS
STUFF
|
|
cidersurfer
|
posted on 14/2/08 at 10:48 PM |
|
|
Another recommendation for Richards Brothers here...
shimming solid lifters is a job for a friend...
|
|
davidwag
|
posted on 14/2/08 at 11:00 PM |
|
|
Hi Andy,
Nice to see some pictures of the new car. looks a bit Mad
Going to be out this season?
Have to say another supporter of Mark. Builds very quick crossflow engines too.
David Wag
|
|
John Bonnett
|
posted on 15/2/08 at 03:25 PM |
|
|
David Wag said:
Have to say another supporter of Mark. Builds very quick crossflow engines too.
You are right and he's a very good peddler too. He told me he got FTD at Porlock with an all steel crossflow in a Fiesta beating a 6R4 in the
run-off. Very brave as well.
John
|
|
ANDYSHORT
|
posted on 16/2/08 at 10:42 PM |
|
|
davidwag
hi david how are you ! dont know if i will be out this year may see some testing soon though ! all painted now ready for final build-up will post pics
in archive as soon as poss what projects you got on the go?
|
|