Printable Version | Subscribe | Add to Favourites
<<  1    2  >>
New Topic New Poll New Reply
Author: Subject: Pre-IVA checks please (Picture heavy)
tims31

posted on 15/5/17 at 11:54 AM Reply With Quote
quote:
Originally posted by David Jenkins
My SVA inspector told me that if he looks straight down from the arch and can't see rubber then it's obviously OK. If he can see the wall of the tyre then he will look a lot closer, probably using a straight edge and rule to check how far it sticks out - in other words, questionable and needs investigation. If he can see tread the it definitely fails! Other testers may have different ideas.

As far as I can see in the photos, I'd say that you're well covered.


Yep, using that rule it is well within, thanks





Build: http://www.martinsfurybuild.co.uk/

View User's Profile Visit User's Homepage View All Posts By User U2U Member
FuryRebuild

posted on 16/5/17 at 11:24 AM Reply With Quote
I like the way you've finished the transmission tunnel - I was wondering about the sharp angles on the retaining strips - are they inside the radius checks?

Also with your hoses - in one of the photos it looked like they rubbed against each other. You may need to find a way of locking that down.





When all you have is a hammer, everything around you is a nail.

www.furyrebuild.co.uk

View User's Profile Visit User's Homepage View All Posts By User U2U Member
tims31

posted on 16/5/17 at 11:46 AM Reply With Quote
quote:
Originally posted by FuryRebuild
I like the way you've finished the transmission tunnel - I was wondering about the sharp angles on the retaining strips - are they inside the radius checks?

Also with your hoses - in one of the photos it looked like they rubbed against each other. You may need to find a way of locking that down.


The edging strips are rounded to 2.5mm radius so should pass the test.
As for the hose your right but I am in the process of changing the thermostat housing at the moment as it has the common leak so will try and adjust the hoses once that has been replaced. Thanks for pointing it out.





Build: http://www.martinsfurybuild.co.uk/

View User's Profile Visit User's Homepage View All Posts By User U2U Member
<<  1    2  >>
New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.