Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Midlana Book 2nd edition
neilp1

posted on 1/6/16 at 11:48 AM Reply With Quote
Midlana Book 2nd edition

Is there much difference between the original book and the 2nd edition?
View User's Profile View All Posts By User U2U Member
coozer

posted on 1/6/16 at 02:01 PM Reply With Quote
Dunno, I've got the first one. Might be worth asking Kurt over on his forum??

Might just be some updates as he did a lot of updates before publication.





1972 V8 Jago

1980 Z750

View User's Profile Visit User's Homepage View All Posts By User U2U Member
neilp1

posted on 1/6/16 at 02:09 PM Reply With Quote
I've got the 1st one as well, but can't decide whether to build one or not as I quite fancy an R1 Riot or something similar + I don't do feet & inches always worked in metric
View User's Profile View All Posts By User U2U Member
coozer

posted on 1/6/16 at 03:08 PM Reply With Quote
I'm going to use a turbo zetec to focus rs spec, looking for 350bhp and don't mind imperial but the way he's done in metric fractions, 1.225 inches makes my mind boggle. Would have much rather it was 2 3/4"!!





1972 V8 Jago

1980 Z750

View User's Profile Visit User's Homepage View All Posts By User U2U Member
Ugg10

posted on 1/6/16 at 03:33 PM Reply With Quote
I would have thought the new 1,6 ecoboost engine would be ideal for this car, this can be fairly easily modified to around 300HP.

http://www.pumaspeed.co.uk/car-Fiesta-ST-180-16-Ecoboost_1_326.jsp

Or possibly with a bit of modification to the rear end, a 2wd converted Scooby flat four (see SDR WR3 Storm) :-)





---------------------------------------------------------------
1968 Ford Anglia 105e, 1.7 Zetec SE, Mk2 Escort Workd Cup front end, 5 link rear
Build Blog - http://Anglia1968.weebly.com

View User's Profile View All Posts By User U2U Member
mcerd1

posted on 1/6/16 at 04:02 PM Reply With Quote
quote:
Originally posted by coozer
I'm going to use a turbo zetec to focus rs spec, looking for 350bhp and don't mind imperial but the way he's done in metric fractions, 1.225 inches makes my mind boggle. Would have much rather it was 2 3/4"!!


At least it makes it easier to convert to metric if its in decimal inches' - everything is just x 25.4.

It only becomes a problem if its sized for imperial materials and you've only got metric ones.... All those little 0.4mm's can add up to a problem if your not careful....





-

View User's Profile View All Posts By User U2U Member
big_wasa

posted on 1/6/16 at 05:28 PM Reply With Quote
I didn't know there was a second edition but from early comments I doubt the new edition will have metric.

As far as I know no one has produced a road worth car yet., here or any where other than kurts. One is close and another well under way and mine s two tubs of parts and an engine

View User's Profile View All Posts By User U2U Member
dai1983

posted on 1/6/16 at 08:19 PM Reply With Quote
I've got the 2nd edition and I can assure you it's still in part inches. You could always calculate the sizes and mark this on the plans. Other changes are explained on Kurts site, one of which is a coil bound option which I have and feels like it won't stand up to much abuse.

Personally Ive got a donor but keep changing my mind, getting side tracked into doing boring stuff or wasting my time on other sites. I'm also a bit apprehensive as there's a few things I'm unsure/concerned about at this time. I'd also like a Riot (I really desire a j15) but I have more free time than disposable cash at the moment. Light(ish) weight, 1.7 puma engined on a budget is my plan.

View User's Profile View All Posts By User U2U Member
big_wasa

posted on 1/6/16 at 08:44 PM Reply With Quote
Coil bound ? Do you mean out board shocks ?

I love the Sylva kit but I won't ever fit. Like the Locost, I can make me fit a Midlana.

View User's Profile View All Posts By User U2U Member
dai1983

posted on 1/6/16 at 08:49 PM Reply With Quote
Coil bound as in the book has been bound by a coil to make it easier to open and stay open. It's handy to have if you use it as a manual but it doesn't feel as robust and I can imagine a few pages ripping off as you build the car.
View User's Profile View All Posts By User U2U Member
big_wasa

posted on 1/6/16 at 08:55 PM Reply With Quote
Ah I see what you mean.
View User's Profile View All Posts By User U2U Member
CorseChris

posted on 14/7/16 at 08:24 AM Reply With Quote
There are one or two dimension errors in the 1st edition - all the details/corrections are on the Midlana forum, but the 2nd edition has been corrected. Other than that, pretty much the same I think. I was slightly tempted by having a coil bound copy for the workshop and the solid spine binding for the house, but they aren't cheap so I got over it! I was perfectly happy to pay the price for my first copy because of the content. Shame there isn't a significant discount for a second copy but I understand why not of course.
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.