Hi all
I'm looking for a pedal box for my TMXR chassis. I bought the Obp kit only to find its too wide to fit on the bottom rail.
Soooo I'm now looking for a smaller alternative.
Thanks in advance

I have a Haynes roadster spec pedal box with mx5 clutch and brake cylinders for sale. I'm wanting £100 for it all posted

u2u me your dimensions and i'll measure it tomorrow


Description


Description


Description


Description


Description


Description

[Edited on 10/5/17 by ste]

Thanks ste. I'll get the measurements over to you shortly.

Hi,

Are you willing to DIY, or are you looking exclusively to already made pedal box?
If you are willing to DIY, here is the Haynes Roadster pedal box I redesigned to use square section tubes as pedal shafts instead of 3 and 5mm plates.

My blog post 1
My blog post 2
Link to the Pedalbox construction guide (PDF) I made for my fellow builders (in English)

You just have to adapt the clutch pedal as my pedal box is designed for a cable clutch, but you just make a second brake pedal with the same length as the clutch pedal.

Hope that can help

Fantastic pfd!
Thanks

Thanks.... Thats one hell of a good pdf.
The standard haynes box is gonna be to wide for my chassis.
Im gonna use talons, less thinking and i can concentrate on the wiring while i wait for it to be delivered