Board logo

Ali turning required
turbodisplay - 15/6/17 at 05:29 PM

Anyone have recomendations for someone for turning an ali component. It has an external thread of m30*1.5, max diameter 46mm, about 50mm long and an M14 * 0.75mm internal thread. I will need 5, but only one in the near future.
I have a dxf file of said part.

liam.mccaffrey - 15/6/17 at 06:06 PM

My local machinist can do these for you and I can send by post. I've done this for other folk on here.

If you're stuck it's an option

andygfc - 15/6/17 at 07:46 PM