Board logo

do the capri axles fit into the chassis designed by ron champion
lee201283 - 7/2/03 at 11:37 AM

do the capri axles fit into the chassis designed by ron champion


Mark H - 7/2/03 at 11:47 AM

The title says it all. You can change the body text!
if you want.

Sorry don't know answer, just bored at work.


kingr - 7/2/03 at 11:53 AM

So, let me get this straight, your question is : do the capri axles fit into the chassis designed by ron champion? Because I wasn't quite sure after the fourth time on the same screen.

Kingr


Metal Hippy™ - 7/2/03 at 12:05 PM

Answer = yes.

Want one?


Mark H - 7/2/03 at 12:42 PM

Have you got one then?


Metal Hippy™ - 7/2/03 at 12:43 PM

Yep.

Wanna swap it for something?


Dick Axtell - 7/2/03 at 06:11 PM

Lee,

Have a look at the piccies in my photo area. These show a potential foul point with one of the trans tunnel verical tubes. I'll know for sure when I've installed the prop-shaft.


Mark Allanson - 7/2/03 at 07:18 PM

Look 5 threads down, "I can eventually say it works". The width of the axle is (I think) better than the Escort, and they are more available. Do a search on my threads about the axle, if you need any more info, either U2u or email me for more details


lee201283 - 9/2/03 at 04:49 PM