Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Fury IRS drive shaft boot needed
FuryRebuild

posted on 19/8/20 at 07:44 AM Reply With Quote
Fury IRS drive shaft boot needed

Hi All

Does anyone know which drive-shaft boots belong on the Fury Original IRS (with the sierra diff). My drive shafts are splined both ends. I think they were cosworth sierra spec originally.

Many thanks
M





When all you have is a hammer, everything around you is a nail.

www.furyrebuild.co.uk

View User's Profile Visit User's Homepage View All Posts By User U2U Member
mcerd1

posted on 23/8/20 at 07:38 PM Reply With Quote
Cossie 2wd shafts have 108mm lobro CV joints
Cossie 4x4 shafts have 100mm lobro's
Std GKN boots should be all you need, but if it's a tight squeeze you can get 'fast boots' (lots of car brand use these joints/boots)

https://www.demon-tweeks.com/uk/gkn-standard-cv-joint-boot-117139/

Or:
https://www.demon-tweeks.com/uk/gkn-aerodynamic-cv-joint-boot-243477/


If it's not one of the above then it'll just be a std. Sierra one rather than a cossie





-

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.