Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Ali turning required

posted on 15/6/17 at 05:29 PM Reply With Quote
Ali turning required

Anyone have recomendations for someone for turning an ali component. It has an external thread of m30*1.5, max diameter 46mm, about 50mm long and an M14 * 0.75mm internal thread. I will need 5, but only one in the near future.
I have a dxf file of said part.

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member

posted on 15/6/17 at 06:06 PM Reply With Quote
My local machinist can do these for you and I can send by post. I've done this for other folk on here.

If you're stuck it's an option

Build Blog
Build Photo Album

View User's Profile View All Posts By User U2U Member This User Has MSN Messenger

posted on 15/6/17 at 07:46 PM Reply With Quote
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply

go to top

Website design and SEO by Studio Montage

All content 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [ 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.