Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: How to tell a 1300 from a 1600 Crossflow Sump
The Doc

posted on 16/8/18 at 08:31 AM Reply With Quote
How to tell a 1300 from a 1600 Crossflow Sump

Hi,

I have a lone XFlow sump which was never with an engine. Rear bowl but how can I distinguish a 1600 from a 1300?

Thanks in advance

Mike





Q: Who wants to live until they're 80?
A: Someone who's 79

View User's Profile View All Posts By User U2U Member
redturner
Senior Builder






Posts 449
Registered 9/11/12
Member Is Offline

Photo Archive Go!
Building: Run 2 ltr Black Top in single seater race car.

posted on 16/8/18 at 09:22 AM Reply With Quote
quote:
Originally posted by The Doc
Hi,

I have a lone XFlow sump which was never with an engine. Rear bowl but how can I distinguish a 1600 from a 1300?

Thanks in advance

Mike [/quote

The 1600 will have relief flutes down one side for the rods to clear....

View User's Profile E-Mail User View All Posts By User U2U Member
Dick

posted on 16/8/18 at 10:17 AM Reply With Quote
From memory and it is starting to go a 1300 sump the sides are straight down from the bolt holes to the bottom of the pan and the 1600 has a bulge in the sides just below the bolt hols, this was so the rods missed the sides. Also im sure the sump was a fraction deeper to
View User's Profile View All Posts By User U2U Member
David Jenkins

posted on 16/8/18 at 11:40 AM Reply With Quote
The 1600 version is deeper - the crankshaft will hit the 1300 one (don't ask how I know... )

There are a few pictures of my 1600 sump here, where I describe how I shortened it for my car. Maybe you can get some clues from them.


[Edited on 16/8/18 by David Jenkins]






View User's Profile Visit User's Homepage View All Posts By User U2U Member
The Doc

posted on 17/8/18 at 07:53 AM Reply With Quote
Thanks, Really helpful! Makes me think it's a 1300 version





Q: Who wants to live until they're 80?
A: Someone who's 79

View User's Profile View All Posts By User U2U Member
redturner
Senior Builder






Posts 449
Registered 9/11/12
Member Is Offline

Photo Archive Go!
Building: Run 2 ltr Black Top in single seater race car.

posted on 18/8/18 at 11:56 AM Reply With Quote
I have just posted my version of a lowered sump for the 1300 Locost. I have done several of these and they seem to work....It is in my album but not sure how to make it appear on here,,,
View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.