Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Under-dash-panel is one needed?
jps

posted on 3/2/18 at 11:17 AM Reply With Quote
Under-dash-panel is one needed?

Is it required to panel from the bottom edge of the dashboard back (I.e towards the engine bay)? If so, is this best done in the same way as the transmission tunnel or is it better to be easily detachable?
View User's Profile Visit User's Homepage View All Posts By User U2U Member
CosKev3

posted on 3/2/18 at 03:47 PM Reply With Quote
For IVA?

the bottom of the dash needs a certain radius on it,but there is no requirement for a panel otherwise.

View User's Profile View All Posts By User U2U Member
40inches

posted on 3/2/18 at 05:36 PM Reply With Quote
They check with the sphere under the dash, so yes it needs to be paneled. I used plastic sheet.
View User's Profile View All Posts By User U2U Member
loggyboy

posted on 3/2/18 at 07:44 PM Reply With Quote
There is an imaginary line drawn from underside of dash horizontally forwards, all thats above is tested with a 165mm sphere, and below a 100mm sphere. So its not essential but depends on whats above the line.





Mistral Motorsport

View User's Profile View All Posts By User U2U Member
40inches

posted on 3/2/18 at 08:06 PM Reply With Quote
quote:
Originally posted by loggyboy
There is an imaginary line drawn from underside of dash horizontally forwards, all thats above is tested with a 165mm sphere, and below a 100mm sphere. So its not essential but depends on whats above the line.


Yep! So fuse boxes steering shafts etc will be tested.

View User's Profile View All Posts By User U2U Member
nelmo

posted on 3/2/18 at 08:25 PM Reply With Quote
Nothing under the dash was tested in my IVA last August and I can clearly see my fuse box and the main wires from the battery.

Ditto under the steering wheel, although I did put corrugated tube over the brake lines where they passed under the steering column (again, not tested).





Build Blog

View User's Profile View All Posts By User U2U Member
CosKev3

posted on 4/2/18 at 09:50 AM Reply With Quote
quote:
Originally posted by 40inches
They check with the sphere under the dash, so yes it needs to be paneled. I used plastic sheet.


Pretty sure they only check upto the vertical line level with the bottom of dash?

http://www.locostbuilders.co.uk/viewthread.php?tid=200814

[Edited on 4/2/18 by CosKev3]

View User's Profile View All Posts By User U2U Member
loggyboy

posted on 4/2/18 at 01:26 PM Reply With Quote
On review the imaginary line is 150mm above the seat. But behind dash is still checked with 165mm sphere.









Mistral Motorsport

View User's Profile View All Posts By User U2U Member
CosKev3

posted on 4/2/18 at 03:05 PM Reply With Quote
I would say items between the 150mm line and the vertical line from the bottom of dash are checked,hence the item shown in the pic being below the line from the dash?
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.