hi all, i need some help, i have a koso dash to fit to my car, but the fuel gauge ohm setting's are 100ohm's or 500ohm's, but i have a standard sierra fuel sender and the reading about 20ohms full and around 260/270ohms empty, so what can i do?

can i ad reistors insuch away, it will work or do i need a need sender unit to match the ohms reading of teh dash?

if resistor what size?
if new sender does anybody know of one i can fit?

thanks

stuart

personally i would fit a new sender, one that is caibrated to match the dash, it will save a lot of hassle

Could you not just bend the sender arm through 180 deg
Then see if your dash works

Hi,

I fitted a sender from a black bird and works fine with the Koso gauges

Hope this helps

Cheers
Adam

hi all, does anybody know where the blackbird fuel sender enters?

i have my hole at the top will it work?

thanks

stuart

I fitted mine in to the top of my MK tank. Bit of bending of the float is needed but works fine.

Cheers
Adam

Sorry Stuart got no pics just keep offering it to the tank, thats all i did.

Sorry i can't be of any help

Cheers
Adam

ok, thank you any way.

stuart