Hi Guys,

I am looking at one of these as an alternative to the usual options of Raceline , Dunnell sumps mainly for cost. I will be using on track so needs to be suitable for this kind of application.

Anyone have any experience? what are your thoughts?

https://www.tmrsupplies.co.uk/products/brisca-f2-zetec-sump-kit-neil-dunne/

and

https://www.neildunnewelding.co.uk/fuel-tanks-and-sumps/

Thanks,
Matt

https://www.kitspares.co.uk/index.php?route=product/product&path=_8&product_id=1190

I have no knowledge of the parts you require, but I will say, that the work that Neil has done for me, over the years has been faultlessly perfect!!

Plus helped by the fact, hes workshop is only 8 miles away from me

steve

And a really good bloke to boot.
His stuff is used a lot on oval track racing. It must work well or it wouldn't sell.

i have one of his sumps and it is better quality than the others i have seen and no fettling required

[Edited on 16/12/18 by chris]

quote:

---

Originally posted by chris
i have one of his sumps and it is better quality than the others i have seen and no fettling required

[Edited on 16/12/18 by chris]

---

its been a number of years i am sure a went direct i am building another engine and will need another sump so i will try to go direct again

quote:

---

Originally posted by chris
its been a number of years i am sure a went direct i am building another engine and will need another sump so i will try to go direct again

---