Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Brake flexi line touching wishbone bracket
jps

posted on 27/3/19 at 09:35 PM Reply With Quote
Brake flexi line touching wishbone bracket

The small brackets used to support a bulkhead connector (to join flexi-line to hard brake line) are right underneath the front top wishbone brackets on my build. As a result the flexi-line is in contact with the bracket as it comes out of the hole in the panel.

Can I use something (rubber tube?) to protect the flexi-line, or do I need to move it to avoid any contact?

View User's Profile Visit User's Homepage View All Posts By User U2U Member
rusty nuts

posted on 27/3/19 at 09:43 PM Reply With Quote
Can you not slacken the fitting at one end to turn the hose slightly thus clearing the wishbone?
View User's Profile View All Posts By User U2U Member
snapper

posted on 27/3/19 at 09:52 PM Reply With Quote
Yes a larger bore rubber pipe will provide suitable wear protection being itself sacrificial. It will wrar but not at a great rate, check before MOT every year.





I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)

View User's Profile View All Posts By User U2U Member
JAG

posted on 28/3/19 at 09:56 AM Reply With Quote
I'd move it until it doesn't contact anything.

Minor risk of it wearing through but why take the chance with your brakes?





Justin


Who is this super hero? Sarge? ...No.
Rosemary, the telephone operator? ...No.
Penry, the mild-mannered janitor? ...Could be!

View User's Profile View All Posts By User U2U Member
steve m

posted on 28/3/19 at 06:35 PM Reply With Quote
"Can you not slacken the fitting at one end to turn the hose slightly thus clearing the wishbone?"

Exactly what I have done on my car, as without a slight twist the hoses would foul on the shock,

steve





Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at




View User's Profile View All Posts By User U2U Member
gremlin1234

posted on 28/3/19 at 09:27 PM Reply With Quote
an alternative, is to cable tie the flexy to the wishbone, so they don't rub. and have suitable stress relief (ie rubber pipe) where the cable tie holds it.
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.