Board logo

Steel stockholders in the Midlands?
Joshy - 12/5/19 at 05:40 PM

Hi all,

Can anyone recommend a decent steel stockholders in the Midlands? The closer to Warwick, the better!

Thanks,
Josh


rusty nuts - 12/5/19 at 06:10 PM

Have a look on the migwelding forum, they have a list of metal warehouses


wonderfulweasel - 12/5/19 at 07:17 PM

I've just got a couple of bits from Mallard Metals in Kings Heath, Birmingham.
Very happy with their service.


miskit - 12/5/19 at 08:27 PM

You can ask/search on the Mig welding forum but I can save you the time and tell you the answer you will get !
https://www.fhbrundle.co.uk/customer-services/birmingham
I use their Southampton branch - great prices and cheap delivery


MikeR - 12/5/19 at 08:30 PM

There is one in Bedworth (north Coventry). Used to be metal supermarket but changed hands many years ago. It doesn't do a minimum order quantity and will cut the metal for you. If you're ordering a few lengths tell them what you're doing and see if they can do a deal.


907 - 12/5/19 at 09:17 PM

I think they do steel in Sheffield


nick205 - 13/5/19 at 09:10 AM

In Winchester (down South) I've used B&M Steel as they have a depot in Winchester where I live.

https://www.bmsteel.co.uk/

Have a check here and see if they've got a depot near you.

Good stock, good prices and my local branch will cut stuff up as well so you can get it in your car, van etc. Keep in mind when using them I had a VW Passat estate so no shortage of rear space with the back seats down. Bought box section, sheet and flat + round bar steel from them and all fine.


WallerZero - 13/5/19 at 09:44 AM

quote:
Originally posted by MikeR
There is one in Bedworth (north Coventry). Used to be metal supermarket but changed hands many years ago. It doesn't do a minimum order quantity and will cut the metal for you. If you're ordering a few lengths tell them what you're doing and see if they can do a deal.


Believe this is now Rapid Metals on the Bayton Road Industrial Estate? Even if not, used them loads and decent prices. In fact I will be popping up there today for more metal!

https://www.rapidmetals.co.uk/how-to-find-us/how-to-find-us-coventry/


ReMan - 13/5/19 at 12:32 PM

Ditto this used them whilst metal supermarket