I'm in the process of lightning my RGB car, and decided to change my full cage to a rear hoop and forward diagonals.

So I'm selling the full cage. It was welded in, but could easily have plates welded on it to bolt it in.

It's from my MNR and is made from T45 38 dia x 2.5mm. I had it in my RGB car from new, and has raced for 3 seasons (never used )

It would cost you over £650 as an option on a new MNR, so I'm looking for £250, I've also got the door bars if required (£50)

It should fit straight into an MNR, but if anyone wants it for a Locost chassis, I'll measure it up.

I'm 6'2" by the way, so the height should suit most people.

(Mirrors in pictures not included)


Cage1


Cage2


Birkett

Steve

Bump, before it goes on Ebay, any offers?

Can you measure the width of the front legs please? I'd need it to mount on the exterior of my locost if it was wide enough.

I'll measure it tomorrow and let you know.

Sorry for the delay in getting the dimensions for everyone who's asked.

Here they are:


cage

Does anyone know if this would fit a Locost chassis please ?

Cage wold fit my locost perfectly but I'd need the front legs to be outside the cabin and unfortunately yours would sit inside as the I'd in yours. So I'm out, sorry.

what would be the courier cost to the north east?

I'll weigh the cage tomorrow and see if I can get a quote.

Bump...

A few people have asked about delivery, and I've checked, but due to the size, it looks like it will cost more than the cage is worth, so I don't think that's an option.

I'll be at the Autosport show on the Saturday and Sunday, so I could bring it up to there if anyone's interested.

I'll take £200 including delivery to the Autosport, NEC area.

Could anyone collect and deliver to north east or north Yorkshire for me?

This still for sale?

Sorry sold