sevaun
|
| posted on 25/2/09 at 11:06 AM |
|
|
Twin webers and cvh cam XE sump etc
Hi
I've moved to a XE Red Top on bike carbs so I have the following for sale:
1 pair twin 40 webers jetted for 1.6 XR2 cvh so should be OK for crossflow etc. includes linkage. Overhauled 3 years ago and only used for
hillclimbing since so done very little mileage since
Price £185 + post £15
Photo in my archive
1 off Ali Inlet manifold for above.
Price: £50 + post £5
Photo in my archive
1 off tubular steel exhaust manifold for CVH (XR2 / XR3 engine not Sierra 1.8) Obviously this is modified to fit rwd locost
Price: £50 +post £10
Photo in my archive
1 off CVH 22 KENT cam again brand new 3 years ago and only done 3 seasons at Harewood so milege negligible. Cam was properly bedded in to makers
instructions when fitted.
Price: £100 (£162 from Burtons) + post £5
Photo in my archive
1 off steel vernier cam pulley for above
again from Kent - condition good
Price:£45 (£67 from Burtons) + post £3.50
Photo in my archive
1 off Vauxhall C20XE aluminium sump pan
Price: £25 + post £7.50
Photo in my archive
obviously postage can be reduced for combined purchase.
Paypal accepted or cash on collection
I also have the rest of the XR2 cvh for sale complete with big wing sump but no oil pick up( I ran with dry sump system so used oil pickup in modded
form)
Also has lightened flywheel
Looking for offers around £100?
Or I'll sell the complete engine (less oil pickup ) for £450
Photos now in my photo archive apart from ex manifold photo now added
OPEN TO ALL SERIOUS OFFERS!!
All items now on E bay...
[Edited on 25/2/09 by sevaun]
[Edited on 25/2/09 by sevaun]
[Edited on 25/2/09 by sevaun]
[Edited on 25/2/09 by sevaun]
[Edited on 25/2/09 by sevaun]
[Edited on 26/2/09 by sevaun]
[Edited on 26/2/09 by sevaun]
[Edited on 27/2/09 by sevaun]
[Edited on 27/2/09 by sevaun]
[Edited on 2/3/09 by sevaun]
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
Shandylegs
|
| posted on 26/2/09 at 11:23 AM |
|
|
Does the CVH Exhaust Manifold follow the standard routing?
Also what size are the primaries?
Thanks......
|
|
|
sevaun
|
| posted on 26/2/09 at 12:57 PM |
|
|
Ex manifold
Hi Shandylegs
The manifold is actually an Ashley XR2 4-2-1 steel exhaust cut at the bottom and rotated to bring the exhaust out of the side panel of the locost
rather than exiting under the engine as in FWD cinfiguration. As far as the sizes are concerned I'll have to let you know tonight when I get
home. I'll also post some pics tonight in my archive
Hope this helps
Sevaun
|
|
|
sevaun
|
| posted on 26/2/09 at 09:52 PM |
|
|
Ex manifold now in archive
Hi Shandylegs
Ex manifold pic now in archive
Primaries are 1.5"
Hope this helps
Sevaun
|
|
|
