Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Tip hung pedal box - plans
Jonb_5

posted on 25/11/19 at 06:38 PM Reply With Quote
Tip hung pedal box - plans

Hi,

I am going to make a top hung pedal box to make with theaster cylinders I currently have an wondered if anyone had done this before and how they went about it.

Thanks

Jon

View User's Profile View All Posts By User U2U Member
JC

posted on 26/11/19 at 06:55 AM Reply With Quote
There’s a set of plans in the Haynes Roadster manual that could be inverted and adapted?
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
David Jenkins

posted on 26/11/19 at 08:01 AM Reply With Quote
I sketched out what I wanted, then made a mock-up frame using thin MDF to hold the pedals (from an old Escort).

After fiddling around and making adjustments I drew up final sketches and transferred them to metal sheet.






View User's Profile Visit User's Homepage View All Posts By User U2U Member
Rod Ends

posted on 26/11/19 at 01:05 PM Reply With Quote
Have a look on Wilwood, Tilton, AP Racing, etc. sites as they have drawings for their pedals.
View User's Profile View All Posts By User U2U Member
motorcycle_mayhem

posted on 27/11/19 at 05:55 PM Reply With Quote
If these would save you some time and/or hassle, I do have a top pedal set (brakes and clutch) on a shaft. There's a related accelerator pedal (more of an addendum) which is lurking somewhere... somewhere...

Description
Description

Description
Description

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.