Board logo

T shape seal
the_big_1 - 4/9/19 at 08:17 PM

Hi guys,

Any idea where I could get a sort of T shape rubber seal.
It to go between the bonnet and scuttle to cover the joint etc.


Cheers.


rusty nuts - 4/9/19 at 09:02 PM

Woolies although you may have to wait until next week as they are at beauliea. I originally used some deep “U” trim on the front and rear of the bonnet


40inches - 4/9/19 at 10:00 PM

I used this one https://www.woolies-trim.co.uk/product/1805/rubber-extrusion Glued to the bonnet.
Description
Description


myke pocock - 5/9/19 at 11:09 AM

Try these people: https://www.rubbertrim.co.uk/