Board logo

Silicone sealant?
David Jenkins - 6/10/19 at 02:39 PM

Right... here's a random question for the locostbuilders posse...

I have to replace the seal around the bottom of my shower tray - not a hard job, just a bit of a faff, but I can't work out the best sealant to buy. I've looked at a few products, but some of the negative reviews are a bit grim. I have never had much success with acrylic sealants, so it probably has to be silicone.

So - can anyone recommend a good brand of white silicone sealant? I don't mind paying the price if it really is good stuff, as I don't want to be going back and doing it again in 6 months time.


obfripper - 6/10/19 at 03:31 PM

Have a look at:

https://www.screwfix.com/p/dow-785-bacteria-resistant-sanitary-silicone-white-310ml/58308

Should do all you need.

Dave


Angel Acevedo - 6/10/19 at 04:22 PM

quote:
Originally posted by obfripper
Have a look at:

https://www.screwfix.com/p/dow-785-bacteria-resistant-sanitary-silicone-white-310ml/58308

Should do all you need.

Dave



Polyurethane based sealer?
Good excuse to buy (and use) a tube...
Whatever is left on the tube will go off sooner than later, so itīs better to have several jobs ready before opening.


David Jenkins - 6/10/19 at 04:46 PM

quote:
Originally posted by Angel Acevedo

Whatever is left on the tube will go off sooner than later, so itīs better to have several jobs ready before opening.


That is so true - I buy this stuff, use what I need, and try my best to seal the tube... and next time I look I have a cylinder of solid sealant.

I might have a go at making some of these on my 3D printer - but I bet they still won't help.


perksy - 6/10/19 at 06:50 PM

quote:
Originally posted by obfripper
Have a look at:

https://www.screwfix.com/p/dow-785-bacteria-resistant-sanitary-silicone-white-310ml/58308

Should do all you need.

Dave





We use this one at work everyday of the week and wouldn't use anything else (NHS Maintenance)


Charlie_Zetec - 7/10/19 at 12:53 PM

I've previously used a product called CT1, but think they've recently released a new version called BT1 that is similar in terms of mould/fungus resistance. Not there cheapest, but I've never had any issues with it.


David Jenkins - 7/10/19 at 03:52 PM

quote:
Originally posted by obfripper
Have a look at:

https://www.screwfix.com/p/dow-785-bacteria-resistant-sanitary-silicone-white-310ml/58308

Should do all you need.

Dave


Well, that's what I've got today... we'll see how it goes...

[Edited on 7/10/19 by David Jenkins]


BangedupTiger - 7/10/19 at 04:03 PM

CT1, everything else is poop in comparison.


macc man - 7/10/19 at 05:49 PM

I fit bathrooms for a living and highly recommend the Dow 785 silicone. Most others will go mouldy fairly quickly.
However all silicones will tarnish over time so best to use a good mould and mildew spray regularly in the shower area. This will
extend the life of any silicone you use.