Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: zx9r pinto manifold

posted on 6/3/17 at 07:03 PM Reply With Quote
zx9r pinto manifold

So, having tried to find a second hand one to no avail, and loving the DanST ones but finding them outside my budget,

I have embarked upon making my own. Assembled the bits:

[img] Manifold parts
Manifold parts

DanST flange 37.99
Tube courtesy of a Mate up north who is a rep for a tube company 0.00
Flouro lined silicon hose, Ebay 16.55
S/S jubilee clips, Ebay 6.95

So just over 60 quid. A bit cheaper than the kits, but mainly due to the high quality DansT flange.

time to get the welding kit out methinks

View User's Profile View All Posts By User U2U Member

posted on 8/3/17 at 10:28 AM Reply With Quote
Have a question folks

I'm presuming that the carbs should be angled to get them to the same angle that they were on the bike, so....

Do I just try and gauge it from where the float bowl looks about right?

Sorry if this is a silly question, and thanks in advance...

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply

go to top

Website design and SEO by Studio Montage

All content 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [ 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.