Vmax1974
|
| posted on 4/7/17 at 09:40 AM |
|
|
breaking my haynes
Ok i am considering breaking my haynes as i have fallen out with the industry lately and think its time to move to other things for a while at least
So what interest would there be in parts
I must stress that i haven't made a final decision yet
I will break but if someone wants the lot then let me know
Haynes roadster bare book spec chassis
Haynes book spec wishbones
Alloy fuel tank made by k4kev over on haynes forum
2 x sierra diffs 1x push in with shafts 1x bolt on no shafts
2x pair of sierra front hubs with brake calipers and discs one pair untouched since coming off a sierra* 1 pair sold
1 pair Rear hubs and drums
Pair Haynes hear hub carrier
Escort steering rack 2.9 ratio *sold
Sierra column and steering wheel *sold
Set of after market 15" alloys 4 x 100 and 4 x 114 stud patterns with 4 good tyres not sure of et currently on the girlfriends car
Few other springs and hoses laying about
I will soon also be parting with my full set of haynes saturn moulds but some of these will need work
U2u with serious offers for the parts and i will make a decision based on offers
[Edited on 4/7/17 by Vmax1974]
[Edited on 4/7/17 by Vmax1974]
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
Vmax1974
|
| posted on 4/7/17 at 11:37 AM |
|
|
Wheels
|
|
|
nero1701
|
| posted on 4/7/17 at 04:12 PM |
|
|
interested in 1 set of sierra uprights with calipers and disks and Sierra column and steering wheel.
Can you give a price posted please
|
|
|
craigdiver
|
| posted on 4/7/17 at 06:19 PM |
|
|
Interested in the fuel tank, any pics? How much you looking for?
If it ain't broken, fix it anyway (just because).
Building - BMW powered Haynes Roadster/442E hybrid.
Volvo C30 T5 Polestar
|
|
|
Vmax1974
|
| posted on 4/7/17 at 06:35 PM |
|
|
Photos of the tank
|
|
|
craigdiver
|
| posted on 4/7/17 at 06:42 PM |
|
|
Welding looks rough, has it been pressure tested?
If it ain't broken, fix it anyway (just because).
Building - BMW powered Haynes Roadster/442E hybrid.
Volvo C30 T5 Polestar
|
|
|
Vmax1974
|
| posted on 4/7/17 at 06:45 PM |
|
|
Dont know i never made it
|
|
|
craigdiver
|
| posted on 4/7/17 at 07:24 PM |
|
|
Am interested in the wishbones, any pics? And how much?
If it ain't broken, fix it anyway (just because).
Building - BMW powered Haynes Roadster/442E hybrid.
Volvo C30 T5 Polestar
|
|
|
Vmax1974
|
| posted on 4/7/17 at 07:33 PM |
|
|
quote:
Originally posted by craigdiver
Am interested in the wishbones, any pics? And how much?
I will get some photos tomorrow they have surface rust so will need a clean up and paint and to my eye some of the welds (not mine) could do with
dressing will be asking about £125 plus post for them
|
|
|
Vmax1974
|
| posted on 4/7/17 at 07:53 PM |
|
|
|
|
|
Vmax1974
|
| posted on 5/7/17 at 05:22 PM |
|
|
Any more interest before i start looking at ebaying it all
|
|
|
Vmax1974
|
| posted on 7/7/17 at 02:31 AM |
|
|
Here is an idea of prices
Haynes roadster bare book spec chassis £offers just get to get rid
Alloy fuel tank made by k4kev over on haynes forum £90
1 x sierra diffs push in £45* sold pending payment and collection
Pair of sierra push in shafts £30* sold pending payment and collection
1 x sierra diff bolt on no shafts £45
1x pair of sierra front hubs with brake calipers and discs untouched since coming off the donor bit rusty wire brush needed £60 pair * sold pending
payment and collection
1 pair Rear hubs and drums £40
Pair Haynes rear uprights £30
Set of after market 15" alloys 4 x 100 and 4 x 114 stud patterns with 4 good tyres not sure of et £175
Handbrake with cables £20
Fuel pump facet posi-flo £10
[Edited on 7/7/17 by Vmax1974]
[Edited on 7/7/17 by Vmax1974]
[Edited on 8/7/17 by Vmax1974]
|
|
|
Vmax1974
|
| posted on 8/7/17 at 07:10 AM |
|
|
Add to the list is a pair of haynes book spec diff hangers with bolts
|
|
|
nye
|
| posted on 12/7/17 at 05:23 AM |
|
|
I'll take the handbrake and cables 
|
|
|
viceface
|
| posted on 12/7/17 at 09:54 AM |
|
|
hi,
Are the push in shafts still for sale,
what length are the shafts, have they been shortened?
cheers.
|
|
|
Vmax1974
|
| posted on 12/7/17 at 09:58 AM |
|
|
quote:
Originally posted by viceface
hi,
Are the push in shafts still for sale,
what length are the shafts, have they been shortened?
cheers.
Push in shafts and associated diff sold sorry
|
|
|
