Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: removing dents in ally bodywork.
swanny

posted on 30/4/20 at 03:21 PM Reply With Quote
removing dents in ally bodywork.

can anyone point me in the direction of good how-to videos or sites to sort out several dents in my ally bonnet? the car lives in an overcrowded tiny garage and from time to time things have fallen off shelves onto the bonnet.

any recommendations?

I've seen various mentions about heat and compressed air, mallets, hammers blocks of wood etc.

thought I might have a go while we're still locked down.

I've taken a pic and managed to get it my photo archive but cant seem to see the link to it to add it in here

thanks

View User's Profile View All Posts By User U2U Member
gremlin1234

posted on 30/4/20 at 03:40 PM Reply With Quote
I think the reason you are having probs with the photos, is they may not have unique names, try prefixing the names ie 'swanny_thumbnail_Image1.jpg' instead of just 'thumbnail_Image1.jpg'

[Edited on 30/4/20 by gremlin1234]

View User's Profile View All Posts By User U2U Member
gremlin1234

posted on 30/4/20 at 03:48 PM Reply With Quote
if you want inspiration on working with ali bodywork see
John Bonnett's GT6
http://www.locostbuilders.co.uk/forum/4/viewthread.php?tid=178173&page=1

View User's Profile View All Posts By User U2U Member
swanny

posted on 30/4/20 at 03:51 PM Reply With Quote
quote:
Originally posted by gremlin1234
I think the reason you are having probs with the photos, is they may not have unique names, try prefixing the names ie 'swanny_thumbnail_Image1.jpg' instead of just 'thumbnail_Image1.jpg'

[Edited on 30/4/20 by gremlin1234]


genius. thanks seems to have worked now.


[img] dent
dent
[/img]

View User's Profile View All Posts By User U2U Member
Mr Whippy

posted on 1/5/20 at 10:51 AM Reply With Quote

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
swanny

posted on 1/5/20 at 11:44 AM Reply With Quote
it was a bit heftier than a branch, it was one of these: link

[Edited on 1/5/20 by swanny]

View User's Profile View All Posts By User U2U Member
MikeR

posted on 1/5/20 at 07:05 PM Reply With Quote
Turn the bonnet upside down, ensure its on a smooth, flat level surface -the surface had to be near perfect. Mask the areas you don't want to touch. Ensure the garage is well lit from all sides, you don't want Shadows.

Prep for a long evening. I'd get some beer in.
Open the first beer, lift the blue Ice box up to the original height, aim for the non masked area and drop 😁


(Sorry that doesn't help but it's our it to the top of the conversations)

View User's Profile View All Posts By User U2U Member
gremlin1234

posted on 1/5/20 at 08:24 PM Reply With Quote
quote:
Originally posted by MikeR
Turn the bonnet upside down, ensure its on a smooth, flat level surface -the surface had to be near perfect. Mask the areas you don't want to touch. Ensure the garage is well lit from all sides, you don't want Shadows.

Prep for a long evening. I'd get some beer in.
Open the first beer, lift the blue Ice box up to the original height, aim for the non masked area and drop 😁


(Sorry that doesn't help but it's our it to the top of the conversations)
hint, if doing this don't fill the cooler with the beer before it falls, - two reasons, it would be heavy and difficult to get to the right height, and more importantly, to avoid said beer getting shaken and fizzy

View User's Profile View All Posts By User U2U Member
MikeR

posted on 1/5/20 at 08:41 PM Reply With Quote
quote:
Originally posted by gremlin1234
quote:
Originally posted by MikeR
Turn the bonnet upside down, ensure its on a smooth, flat level surface -the surface had to be near perfect. Mask the areas you don't want to touch. Ensure the garage is well lit from all sides, you don't want Shadows.

Prep for a long evening. I'd get some beer in.
Open the first beer, lift the blue Ice box up to the original height, aim for the non masked area and drop 😁


(Sorry that doesn't help but it's our it to the top of the conversations)
hint, if doing this don't fill the cooler with the beer before it falls, - two reasons, it would be heavy and difficult to get to the right height, and more importantly, to avoid said beer getting shaken and fizzy



No, cooler must be as it was originally when the debt was created. So if it was full.... It needs to be full now otherwise you won't get the negative effect to smooth out the debt

View User's Profile View All Posts By User U2U Member
swanny

posted on 4/5/20 at 01:54 PM Reply With Quote
I knew I could count on the locost community!
:-)

View User's Profile View All Posts By User U2U Member
rusty nuts

posted on 4/5/20 at 03:07 PM Reply With Quote
Possible some very careful use of a hammer and dolly?
View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.