Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Bonnet bulge supplier
r1_pete

posted on 24/7/17 at 12:37 PM Reply With Quote
Bonnet bulge supplier

I'm going to need a bonnet bulge to clear the RV8 inlet manifold in my Porsche 944.

Can anyone reccomend a supplier? Ive googled an ebay'd and most suitable ones are in the States, something along the lines of late 60s early 70s muscle car bulges is what Im after....

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
40inches

posted on 24/7/17 at 02:18 PM Reply With Quote
I have this company bookmarked. Never used them!
http://honeybournemouldings.co.uk/fibreglasspowerbulges.html

View User's Profile View All Posts By User U2U Member
r1_pete

posted on 24/7/17 at 02:44 PM Reply With Quote
Cheers, their bulge no 3 might just do the job, not quite what i had in mind, but could look right on the car..
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
r1_pete

posted on 24/7/17 at 02:54 PM Reply With Quote
Cheers, their bulge no 3 might just do the job, not quite what i had in mind, but could look right on the car..
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
Chris_Xtreme

posted on 24/7/17 at 11:18 PM Reply With Quote
I used one for a dax rush

who are now http://www.manmotorsport.co.uk/

much bigger then the ones already mentioned.

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.