Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Plastic fuel tank leak - Daytona 955i
Simon

posted on 19/1/20 at 10:01 PM Reply With Quote
Plastic fuel tank leak - Daytona 955i

The o/s side panel was held on by cable ties and thought it might be a nice idea to fix it properly. So, tried removing the bodge fix; turns out this is straight into petrol tank which started leaking.

Anyway, I'm in the process of emptying tank then will drill out bodge and make a metal helicoil that I will "glue" into place.

So, the question is - what glue?

Cheers

S

View User's Profile View All Posts By User U2U Member
Mark RSP

posted on 19/1/20 at 10:21 PM Reply With Quote
Years ago I used to use Araldite epoxy resin but I bet there are purpose adhesives out there now for the job
View User's Profile View All Posts By User U2U Member
steve m

posted on 20/1/20 at 08:43 AM Reply With Quote
I also used Araldite, on a rusty Norton tank, but if I was to do it again, I would also after the araldite was cured
line the tank with a tank sealer, most good bike shop's sell the stuff

steve





Thats was probably spelt wrong, or had some grammer, that the "grammer police have to have a moan at




View User's Profile View All Posts By User U2U Member
Simon

posted on 20/1/20 at 10:08 AM Reply With Quote
Cheers chaps
View User's Profile View All Posts By User U2U Member
r1_pete

posted on 20/1/20 at 10:20 AM Reply With Quote
I think I’d be on the look out for a replacement tank. The original holes are probably blind, and in use the tank will flex slightly but probably enough to crack a repair.

Its your bike but I wouldn’t risk a leaky tank, if it does drip its onto a hot engine, and will no doubt soak into your trousers.

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.