ianm67
|
| posted on 5/1/18 at 06:27 PM |
|
|
Part built Dax Rush for sale
I have come to the conclusion that I won't find the opportunity to finish my Zetec powered Rush any time soon so I am putting it up for sale. I
think that two or three weeks of focused effort would have the car finished and ready for IVA. The car owes me around 10K, the most recent expenditure
was a full stainless exhaust system from JEK that cost me £1100. The car comes with all parts to finish including Microsquirt ECU, wideband lamda
sensor, and some nice carbon goodies (bonnet scoop, wheel arch guards etc). Currently fitted with a carbon flyscreen for the purposes of IVA but have
full screen, wipers, fan etc. The car currently sits on a set of brand new staggered Avex A wheels that have never seen tarmac fitted with brand new
T1-Rs.
The engine has been built up on a zero miles short block and benefits from a flowed head and a full GSXR TB set up from DanST.
There shouldn't be any substantial purchases required to complete the build. I have a roll of carpet to trim the car if required, the loom is
complete and needs laying in (I have a full schematic for it). The fuel tank is currently being modified and having an internal injection pump fitted
to it as we speak. I have another exhaust silencer that has an integral CAT for IVA purposes that is being slightly modified to fit the exhaust
system. The engine plumbing is almost complete (but in a box). I have a set of the original DAX extended chrome indicators that could be fitted for
IVA. Full weather kit and boot cover come with the car, I also have custom Intatrim seats, harnesses,original windscreen, wiper motor, wheel boxes etc
also ready to go on the car.
I looking for £4500 OVNO and won't entertain stupid offers or tyre kickers. If you are serious and have the cash to purchase please drop me a PM
and I will answer any questions and send a link to some build pictures. This is a very high quality kit for no money at all.The car will need to be
collected from near Taunton. Any Q's, please PM me.
Many thanks,
IanM
[Edited on 5/1/18 by ianm67]
Always biting off more than I can chew.....
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
|
|
tims31
|
| posted on 6/1/18 at 01:12 PM |
|
|
Sounds like there is not too much left to do, a real shame you can't get the time to finish it off.
Would be of great interest if I had the space. Best of luck with the sale
Build: http://www.martinsfurybuild.co.uk/
|
|
|
ianm67
|
| posted on 6/1/18 at 03:38 PM |
|
|
quote:
Originally posted by tims31
Sounds like there is not too much left to do, a real shame you can't get the time to finish it off.
Would be of great interest if I had the space. Best of luck with the sale
Thanks Tim, it's a bargain for somebody that's for sure....!!
Always biting off more than I can chew.....
|
|
|
Yo
|
| posted on 8/1/18 at 04:49 PM |
|
|
Contact ? Regards Dax
Hi Ian M . Can you pm me with contact details as I can't pm you . Thanks
|
|
|
AlexXtreme
|
| posted on 8/1/18 at 05:24 PM |
|
|
Hi Ian, do you have any pictures.. my brother could be keen
Alex
|
|
|
Bigboystoys
|
| posted on 8/1/18 at 05:40 PM |
|
|
Shame you can't finish they really are something special.
Best of luck with the sale
|
|
|
ianm67
|
| posted on 8/1/18 at 07:32 PM |
|
|
quote:
Originally posted by Yo
Hi Ian M . Can you pm me with contact details as I can't pm you . Thanks
I have replied to your U2U.
Cheers,
Ian
Always biting off more than I can chew.....
|
|
|
ianm67
|
| posted on 8/1/18 at 07:33 PM |
|
|
quote:
Originally posted by AlexXtreme
Hi Ian, do you have any pictures.. my brother could be keen
Alex
Hello Alex,
Have sent you a U2U message.
Cheers,
Ian
Always biting off more than I can chew.....
|
|
|
Wes
|
| posted on 9/1/18 at 10:07 AM |
|
|
PM'd
|
|
|
FatChapChipChop
|
| posted on 9/1/18 at 11:26 AM |
|
|
quote:
Originally posted by ianm67
I have come to the conclusion that I won't find the opportunity to finish my Zetec powered Rush any time soon so I am putting it up for sale.
I can certainly vouch for the excellent quality of both the kit and parts, this will make an extremely good car and is at a great price.
Drive fast, don't look back!
|
|
|
ste
|
| posted on 9/1/18 at 10:35 PM |
|
|
It's now mine 
Can't wait to get to work on it.
|
|
|
Bigboystoys
|
| posted on 9/1/18 at 10:57 PM |
|
|
Good luck with the build
|
|
|
ianm67
|
| posted on 10/1/18 at 03:01 PM |
|
|
** NOW SOLD ** Many thanks for all of the interest.
Always biting off more than I can chew.....
|
|
|
ianm67
|
| posted on 10/1/18 at 03:04 PM |
|
|
quote:
Originally posted by ste
It's now mine
Can't wait to get to work on it.
Thanks for the time to contact me and discuss the car Steve, you won't be disappointed. I look forwards to seeing the finished article...!
Always biting off more than I can chew.....
|
|
|
Stevie_P
|
| posted on 10/1/18 at 04:25 PM |
|
|
Very jealous. Was about to pull the pin on this (even though I have a semi built MK).
Probably for the best as the other half would have killed me........
Best of luck with the build.
Steve
[Edited on 10/1/18 by Stevie_P]
|
|
|
