adampage
|
posted on 14/10/20 at 12:25 PM |
|
|
7.5" diff and driveshafts and drive flanges - 3.38 OR 3.14
Hi all,
Relating to the 3.38 diff I advertised before, I've now found the driveshafts to go with it, they're push-in, they're complete, and
they have the drum brake flanges on the end (i.e. with the 4 bolt holes, not the 2 extra bolt holes to mount calipers).
They're a bit dusty having sat in a garage, but they seem complete and in good nick.
Also - I need to check the ratio again, I turned it by hand and counted about 3.38, my Dad did the same thing and reckons it's 3.14, so I need
to go out and check it again very carefully, but it's definitely a ratio less than 3.5!
I'll also take a couple of extra photos later today if anyone's interested.
If anyone wants the set of diff & driveshafts complete, let's say £150.
I'd guess postage will be fairly expensive (maybe £40 ish?) as it'll be heavy, so collection from Stone, Staffs is probably easier, but
i'll look into it if needed.
Thanks
Ad
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
magpies
|
posted on 4/2/21 at 10:39 PM |
|
|
Have you still got it?
best way to check the ratio is to do it over 10 turns of the input or more.
|
|
adampage
|
posted on 5/2/21 at 11:35 AM |
|
|
Good idea.....
....but it is a bit chilly in the garage....
I do still have them. Are you interested?
If so, i'll venture out there and try to settle it once & for all!
Thanks
Ad
|
|
magpies
|
posted on 5/2/21 at 04:49 PM |
|
|
yes interested but ok for a few weeks - wait 'til convenient then U2U me
|
|
adampage
|
posted on 7/2/21 at 07:56 AM |
|
|
Righto
No problem, will do
Thanks
Ad
|
|