Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Best edge trim for tight radius and 1.2mm panel
TimC

posted on 8/4/18 at 05:48 PM Reply With Quote
Best edge trim for tight radius and 1.2mm panel

Hi all,

Anyone recommend anything specific to basically act like an open grommet on a 40-odd mm hole in an aluminium panel?

Ta

[Edited on 8/4/18 by TimC]






View User's Profile View All Posts By User U2U Member
James24785

posted on 8/4/18 at 07:57 PM Reply With Quote
I've got some quite small rubber "U" trim I've used on mine. Can send ya bit thru the post to try?
View User's Profile View All Posts By User U2U Member
obfripper

posted on 8/4/18 at 09:33 PM Reply With Quote
VW part 1J0827417 is a 2 part blanking plug that would probably do the trick, it's approx 40-50mm off hand.
From a mk4 golf, mk5 polo and all the related cars.

Dave

View User's Profile View All Posts By User U2U Member
harmchar

posted on 8/4/18 at 09:41 PM Reply With Quote
There's stuff on eBay called Neoprene blow hole rubber.
Any use?

View User's Profile View All Posts By User U2U Member
TimC

posted on 9/4/18 at 09:50 AM Reply With Quote
quote:
Originally posted by harmchar
There's stuff on eBay called Neoprene blow hole rubber.



And the same to you!


Thanks all,






View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.